Model NO.
HM170M
Production Capacity
10
Cylinder boring machine HM170M:
The machine is mainly used for honing single line engine cylinders and V-engine cylinders of automobiles motorcycles and tractors and also for other machine element holes.·
The machine table can shift of the fixture change 0°, 30°and 45°.
·The machine table is easily up and down manually 0-180mm.
·Reverse precision 0-0.4mm.
·Select mesh-wire degree 0°- 90° or non-mesh-wire.
·Reciprocating speed of up and down 0-30m/min.
·The machine is reliable performance widely use honing, easy operation and high productivity.
·Good rigidity, amount of cutting.
Vertical Honing Machine HM170M
| No. | Item | Unit | Data |
| 1 | Honing hole diameter | mm | 60-140(standard) 130-178(optional) |
| 2 | Maximum depth of honing hole | mm | 320 |
| 3 | Rotation of main shaft | r/min | 120,160,225,290 |
| 4 | Stroke of main shaft | s/min | 35,44,60 |
| 5 | Horizontal motion distance of main shaft | mm | 900 |
| 6 | Lifting height of machine table | mm | 150 |
| 7 | Power of main motor | Kw | 1.5 |
| 8 | Voltage | V | 3~380 |
| 9 | Frequency | Hz | 50 |
| 10 | Power of cooling pump | Kw | 0.125 |
| 11 | Voltage | V | 3~380 |
| 12 | Frequency | Hz | 50 |
| 13 | Maximum size of machine(L×W×H) | mm | 1640×1670×1920 |
| 14 | Weight of main machine | kg | 820 |
Send Message
