MX-Sensor Type for 315MHz and 433MHz 1-Sensor TPMS Programmable Sensor
New MX-Sensor provides 98% vehicle coverage. It integrated both 315MHz + 433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage, which can be programmed by any of Autel TPMS tool. Only ONE Sensor Stocks is Okay for 98% cars. 
The exclusive MX-Sensor patented PRESS release valve stem design, allows rubber and metal valve stems to freely interchange by hand, without requiring a tool for sensor head fitting. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency.
Interchangable both for aluminum metal valve and snap-in rubber valve for free.
1-Sensor Autel New TPMS Sensor can be easily programmed wirelessly even when the sensors have already been mounted to the wheel by any Autel TPMS Tools. And with strong signal strength, now up to 16 sensors can be programmed in one session with AUTEL latest TPMS tools TS508. AUTEL MX-Sensor is 100% clone-able. No relearn is required when the MX-Sensor is cloned with the original sensor ID and put in the same position. Fit for Any MaxiTPMS TOOL. 
Superior battery life and reliability to match OE sensor battery performance are provided for new 315MHz and 433MHz two in one sensor. It's much lighter than most sensors in the market.
Specifications
| Battery Life | ≥5 years |
| Operating Temperature | -40°C to +125°C |
| Storage Temperature | -40°C to +125°C |
| Operating Humidity | ≤90% |
| Operating Frequency | 315 MHz / 433 MHz |
| Pressure Monitoring Range | 100 to 900 kPa |
| Pressure Reading Accuracy | ±10 kPa |
| Temperature Reading Range | -40°C to +125°C |
| Temperature Reading Accuracy | ±5°C |
| G Sensor Reading Accuracy | ±15% |
| Transmission Power | 5-8 dBm |
| Battery | 3.0 V |
| Dimensions (W x H x D) | 42.2 mm x 27.9 mm x 17.4 mm |
| Weight (Without Valve) | 12 g |
Send Message
