LAUNCH Creader 3001 OBD2 scanner is a very Cost-efficient full OBD2 function scanner on the market (the same functions need 40 ). Unlike other car code readers, Launch Creader 3001 is an all in one car code scanning tool. An upgraded version from the more basic code reader with additional functions. It is designed for car owners, DIYers as well as mechanics to determine the cause and solve the problem.
LAUNCH Creader 3001 is a portable code reader which comes with complete OBD2 functions:
- Read and Clear DTCs
- I/M Readiness Check
- Freeze Frame Data Viewing
- O2 Sensor Test
- On-board Monitor Test
- EVAP System Test
- Live Data Stream Viewing
- Vehicle Information
- DTC Lookup.
As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver's side. Check your owner's manual for the location. For DIYers, you don't need to invest in a top-of-the-line scan tool for basic diagnostic functions, our Launch Creader 3001 make DIYers and car enthusiastic repair their vehicle's problem by themselves.
Why Choose LAUNCH Creader 3001?
- LAUNCH Creader 3001 obd2 scanner Supports O2 Sensor test , EVAP system test, On-Board monitor test, While AD310 and AL319 DOES NOT !
What we did upgrade on LAUNCH Creader 3001 OBD2 scanner on 2020 to make it more perfect?
- Add more car models, Fixed more bugs and upgrade car models up to 2020 new models, including cars, SUVs,minivans,light-duty trucks all over the world. But the year supported may vary on different car makes and models.
- Compared with the old version, LAUNCH Creader 3001 OBD2 scanner can be upgraded and it's lifetime free update.
How to update LAUNCH Creader 3001 car code reader?
- Connect the scanner with PC by USB cable.
- Download update software from official website on computer.
- Click the "Creader Series Setup.exe" and follow the message to install the client software on computer.
- Hit "Product Update Tool Setup" to update.
LAUNCH Creader 3001 support 7 languages: English, French, German, Spanish, Russian, Italian, Polish.
- Read/Erase Codes: LAUNCH Creader 3001 car diagnostic scanner can show the detailed description of the Diagnostic Trouble Code (DTCs) and turns off Check Engine Light (MIL), clears codes and resets monitors.
- Live Data: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
- I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
- Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
- On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. It's a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn't severe enough to trigger a check engine light.
- Component Test (EVAP Test): Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
- O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
- Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
- Read Vehicle Information (VIN): Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Nanyang Nantai Test Equipments Co.,Ltd is a joint-stock enterprise that produces common rail test bench, common rail injector test bench and diesel injection pump test benches and diesel parts to serve the automobile aftermarket all over the world.
Nanyang Nantai Test Equipments Co.,Ltd was established in 1998, and started to fight and create in mechanical pump test bench manufacturing factory. We using the purchasing, machining and sale as our major sales model and laid the foundation for the preliminary development of our company.
Q: ARE YOU TRADING COMPANY OR MANUFACTURER ?
A: We are test bench assembling factory. We have had test bench for 20 years.
Q: HOW LONG IS YOUR DELIVERY TIME?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: WHAT IS YOUR TERMS OF PAYMENT ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 40% T/T in advance ,balance before shippment.
Q: How about the use of maintenance technology and equipment ?
A:We have free training about test bench,injector and pump maintenance.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price ,and we have our own engineer, if you have any requirements you can contact us directly.
Send Message
