Hot Patch Car Tube Repair Tire Vulcanizing Machine Plate Vulcanizer, Vulcanizing Machine, Tire Repair Machine

Features:

• Simple, one-man operation.Repairs tread, shoulder and sidewall.Large-capacity, fully rotating C-frame accommodates different wheel sizes and allows for vertical or horizontal repairs.
• Vulcanizing repair process cures the patch and inner tire lining to form a dense, sealed repair job.An adjustable, swing-open, rotating C-frame cavity simplifies tire loading and unloading while maximizing stability.
• Adjustable height tower.Contoured inner and outer curing heads conform to a variety of tire profilesLong-life Acme thread hand-wheel screw applies over 4,000-lbs. of pressure and heat for maximum adhesion of patch to casing.
• Energy and cost efficient for lower operating costs.Lightweight, self-standing design offers portability and maximum stability.Doesn't require any time consuming tensioning straps.
• Handles long sidewall repairs.Cures both patch and plug at the same time.Curing heads can be operated individually or simultaneously for maximum repair efficiency.Constant controlled heating elements maintain optimum temperature.

Tire repair method:

1,Clean the surface of the wound where the tire needs to be repaired and mark it.
2,Use a grinding machine to grind the surface of the wound, the area is slightly larger than the wound.
3,Use the brush to raw rubber and gasoline blending good mortar (or hot glue) evenly coated on the polished.
4,Cut the appropriate size of the rubber, it will fill in the wound.
5,Pressure the hot head on raw rubber (if possible can pad a thin layer of aluminum or iron in the raw rubber), try to put the wound in the central heating head, pressing screw, fixed tires.
6,Turn on the timer switch and set it in the right place, Cold start can refer to "20" (Or adjust the vulcanizing time according to the temperature and the condition of the wound) the heat start time can be a little shorter,if you do not need timing can be set on the manual gear, then the hot head to work.
7,At the end of vulcanization, tire repair machine automatically cut off power supply hot head.
8,Turn off the power switch, loosen the screw tire pressure, carefully remove the hot head, remove the tire.

Precautions:

1. the power cord must be safe ground, the power supply is preferably provided with leakage protection switch, you must turn off the power when replace the fuse.
2. Handle with care when removing hot head, to avoid burns.
3. the device Keep away from acid and other corrosive materials.
4. If you need to fill the tube elongated wound, to be equipped with an oval plate, while marked with small eyes at both ends of the wound to prevent cracking inflated leak.
5. after the head if you use hot sticky dirt, use sand to polish the skin clean, otherwise it will affect the flatness of Tyre, and smoothness.

Boxes + Carton packaging, carton packaging can be customized according to customer requirements, customized according to drawings or design of packaging boxes as required.


Other Products:

YAQIYA factory annual output increased till to 8000 tons for Fe adhesive wheel weights by automatic equipment.

Cangzhou Yaqiya Auto Parts Manufacturer Co., Ltd. specializes in manufacturing and exporting several of wheel balance weights, tire valve, tire repair tools, tire repair seal and tire repair patch. Our company has developed very fast. The enterprise management, employee quality, technical equipment, production technology and supporting facilities, etc. all have achieved international standards, so that our company takes the leading position in the same field in the country. 

We have participated in exhibitions many times, such as Italy, Dubai and other exhibitions
We have become one of the most trusted supplier and cooperation partners of many 
famous brands at home and abroad, like Tiptop, Tiptopol, Wurth, Forch...
 

1. who are we?
We are based in Hebei, China, start from 2014,sell to Western Europe(30.00%),Domestic Market(20.00%),North America(15.00%),Southern Europe(10.00%),Northern Europe(5.00%),Mid East(5.00%),Eastern Europe(5.00%),Africa(3.00%),South America(2.00%),Southeast Asia(2.00%),Eastern Asia(2.00%),South Asia(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
wheel balance weights,tire plug,tire valve,tire patch,tire repair tools

4. why should you buy from us not from other suppliers?
Adhesive wheel weights with best Chinese blue tape and highly corrosion resistance Clip on wheel weights with good steel hook and 100% fit for rims 24 hours in service ,fast reply to each customer

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Italian