Model NO.
td20w-6
Testing Equipment Type
Wireless
Certification
CE, RoHS
Update Method
by Email
Condition
New
Standard
Standard
Sensor Chip
NXP
Sensor Type
External
Screen Size
1.8-Inch
Support Tire Number
10
Function
Tire Pressure and Temperature Measurement
Development
RS232,Connect with GPS Tracker
Working Voltage
DC9V to DC36V for Monitor and Repeater
Frequency
434MHz&Lf
Pressure Range
0 to 1400kpa
Working Temperature
-40ºC to 125 ºC
Battery Life Span
1 to 2years
Battery
Can Be Replaced
Battery Model
Cr1632
Trademark
Jiuan
Transport Package
Box
Specification
1.5kg
Origin
China
HS Code
90262090
Main display interface
- tire mode
- Receiver working status
- Data up and down checking
System Setting Method
Note: System Preset in factory,if correct installation and normal use, do not have to operate the following settings.Enter system setting mode
When it is under normal working status, long press key for 3 seconds, enter the first setting, the screen will display "P1", Shortly press key 1 second each time, number plus 1, it will switch from P1 to P5 circularly. Press key to enter setting.Press key or no press any key approx. 10 minutes, it will exit to normal working status.
P1-P5 definition explanation
P1:Sensor ID LearnP2:Sensor Position Exchange
P3:Tire pressure/temperature warning threshold value setting
P4:Unit Setting
P5:Vehicle tire number setting and sensor location setting
Data Factory Default Setting
| Item | Setting |
| Unit | Bar |
| High pressure warning data | 12 Bar |
| Low pressure warning data | 6 Bar |
| Temperature unit | ºC |
| High temperature warning data | 85 ºC |
| Item | Instruction |
| Psi | Pressure unit: pounds per square inch |
| Bar | Pressure unit:bar |
| ºC | Temperature unit: degrees Celsius |
| ºF | Temperature unit: degrees Fahrenheit |
| Pressure unit conversion | 1Bar=100Kpa≈14.5Psi |
| Temperature unit conversion | 1ºC=33.8ºF |
Product Technical Parameters
- Monitor
| NO. | Item | Technical Parameters |
| 1 | Working Voltage | DC 12V~DC 32V |
| 2 | Working Current | <10 mA |
| 3 | RF Signal Receiving Sensitivity: | <-105 dbm |
| 4 | Working Temperature | -40ºC ~ 85ºC |
| 5 | RF Transmit Signal Modulation Method: | FSK |
| 6 | Working Frequency: |
|
II, Repeater
| No. | Item | Technical Parameters |
| 1 | Working Voltage: | DC 12V~DC 32V |
| 2 | Working Frequency: | 433.92 MHz±30KHZ |
| 3 | RF Transmit Signal Modulation Method: | FSK |
| 4 | RF Signal Transmission Power: | < 10 dbm |
| 5 | RF Signal Receiving Sensitivity: | <-105 dbm |
| 6 | Working Temperature: | -40ºC ~ 85ºC |
External Sensor(T02W)
| No. | Item | Technical Parameters |
| 1 | Sensor battery | CR1632(140mAh) |
| 2 | Suitable | 8v1 valve, bus or truck |
| 3 | Quiescent Current | <0.7uA |
| 4 | Working Temperature | -20ºC~85ºC |
| 5 | Storage Temperature | -20ºC~60ºC(store in normal temperature) |
| 6 | Transmission current | <8mA |
| 7 | Sensor battery lifespan | 1 to 2 years(Battery can be replaced) |
| 8 | RF Transmit Signal Modulation Method: | FSK |
| 9 | Working Frequency: | 433.92 MHz±30KHZ |
| 10 | Weight | 9g±0.5g |
