Model NO.
CTCS-13
Air Supply
0.5-0.6 MPa
Dimensions (mm)Nsions (mm)
2700*750*400
Transport Package
Metal Frame
Specification
CE
Trademark
AA4C
Origin
China
HS Code
8479899990
Production Capacity
100units/Month
AA4C auto car vehicle test line Vehicle Speedmeter Tester CTCS-13
Introduction:
The vehicle speedometer tester is used to detect the indication error of the speedometer when the vehicle is running. Vehicle speedometer tester is one of the important equipment of vehicle safety performance test.
Main features:
Using of reinforced steel guarantees strong and durable structure-bodies, no need for anchor bolt installation, convenient debugging
The roller surface is specially knurled, with high strength, wear resistance and large friction coefficient
It adopts air bag lifting with good lifting synchronicity, which is convenient for vehicle in and out and improves detection efficiency.
Double safety device, the control system has the function of automatic locking of lifting mechanism when the roller speed is higher than 5 km / h, to ensure the test safety
It is equipped with security device to protect the wheel from scratching the tester when it is running at high speed.
Equipped with non-contact sensor, it not only has high test accuracy but also is durable
The speed measurement range is wide, and the speed of the test point is controlled by the wireless remote control
| Model | CTCS-3A | CTCS-10A | CTCS-15A |
| Max. axle-load (kg) | 3000 | 10000 | 15000 |
| Applied wheel tread (width/wide) (mm) | 700(width)/2400(wide) | 700(width)/2700(wide) | 700(width)/2900 wide) |
| Test speed (km/h) | 0-130 | 0-130 | 0-130 |
| Roller diameter x length (mm) | ∮190×850 | ∮190×1100 | ∮190×1100 |
| Air supply | 0.5-0.6 MPa | 0.7-0.8 MPa | 0.7-0.8 MPa |
| Dimensions (mm) | 2700×750×400 | 3200×900×480 | 3200×900×480 |
Introduction:
The vehicle speedometer tester is used to detect the indication error of the speedometer when the vehicle is running. Vehicle speedometer tester is one of the important equipment of vehicle safety performance test.
Main features:
Using of reinforced steel guarantees strong and durable structure-bodies, no need for anchor bolt installation, convenient debugging
The roller surface is specially knurled, with high strength, wear resistance and large friction coefficient
It adopts air bag lifting with good lifting synchronicity, which is convenient for vehicle in and out and improves detection efficiency.
Double safety device, the control system has the function of automatic locking of lifting mechanism when the roller speed is higher than 5 km / h, to ensure the test safety
It is equipped with security device to protect the wheel from scratching the tester when it is running at high speed.
Equipped with non-contact sensor, it not only has high test accuracy but also is durable
The speed measurement range is wide, and the speed of the test point is controlled by the wireless remote control Send Message
