Model NO.
IT-SUPER 701
Coating
Powder Coating
Airflow Direction
Fully Undershot-type
Heating Mode
Direct-Fired Gas Heating
Paint Mist Treatment
Dry-type
Condition
New
Walls
50mm Rock Wool Panel
Plenum Height
600mm
Basement
350mm High
Lighting
LED Lamp
Brightness
> 1,000lux
Filter
High Efficiency Filters
Fan
Direct Drive Fan, 11kw Motor
Air Volume
35,000m3/H
Empty Loaded Air Speed
+/- 0.35m/S
Controls
CE Standard Control Box
Noise
<78dB
Transport Package
Polyfoam and Metal Frame
Specification
7000X4000X2800MM
Trademark
INFITECH
Origin
Guangzhou, China
HS Code
8419899090
Production Capacity
900 Sets/Year
After-sales Service:
24 Hours After Service
Warranty:
2 Years
Type:
Spray Booth
Certification:
CE
Substrate:
Steel
Brand:
Infitech
European Standard One-stop Auto Refinish Car Prep Bay & Painting Baking Booth For Vehicles
1) Product overview
Products: 2 Preparation bays (6.5x4x2.8m) & Paint baking booth (7x4x2.8m)
INFITECH Rear Wall Extraction Preparation Bay is a cost efficient area suitable for sanding preparation and preparing cars and/or parts for the spraying phase to follow. This particular design does not need a concrete pit. It has a ceiling with lights and the airflow is horizontal across the vehicle. The exhaust is through low level exhaust filters.
INFITECH Full Down Draft Spray Booth have inlet plenums across the roof to offer evenly disperse air movement with minimal turbulence in a vertical direction. This reduces the chance of overspray being drawn through the spray booth and settling on the substrate closer to the filters. The working area of the Spray Booth has a grated floor in which the air and overspray is drawn and filtered prior to exhausting from the spray booth.
2) Key features
Direct-fired gas heating system
3) Technical parameters
1) Product overview
Products: 2 Preparation bays (6.5x4x2.8m) & Paint baking booth (7x4x2.8m)
INFITECH Rear Wall Extraction Preparation Bay is a cost efficient area suitable for sanding preparation and preparing cars and/or parts for the spraying phase to follow. This particular design does not need a concrete pit. It has a ceiling with lights and the airflow is horizontal across the vehicle. The exhaust is through low level exhaust filters.
INFITECH Full Down Draft Spray Booth have inlet plenums across the roof to offer evenly disperse air movement with minimal turbulence in a vertical direction. This reduces the chance of overspray being drawn through the spray booth and settling on the substrate closer to the filters. The working area of the Spray Booth has a grated floor in which the air and overspray is drawn and filtered prior to exhausting from the spray booth.
2) Key features
Direct-fired gas heating system
3) Technical parameters
| Item 1: Rear Wall Extraction Preparation Bay | |
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Internal dimensions | 6500×4000×2800mm (L×W×H) |
| External dimensions | 8460×4000×3460mm (L×W×H) |
| PVC soft curtain | 6700×2700mm |
| Ceiling lighting | 8 sets, each 4×18W, 576W total |
| Brightness | > 800Lux |
| Exhaust system | 1×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motor |
| Air volume | 18,000m3/h, 650pa |
| Filters | Floor filter: pleated andreae filter + fiberglass filter Exhaust filter: fiberglass filter |
| Controls | Fan start, emergency stop switch, lighting, failure indication |
| Electrical & Tool cabinets | Yes. |
| Special item | Rated power: 8KW |
| Item 2: Spray Booth with direct-fired heating system | |
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Airflow | Full downdraft for spray and cure |
| Internal dimensions | 7000 X 4000 X 2800mm (L X W X H) |
| External dimensions | 7110 X 5760 X 3460mm (L X W X H) |
| Plenum height | 600mm |
| Entrance door | 1 set, 3200 X 2700mm (W X H), manual door |
| Divider door | 1 set, 6000 X 2400mm(B X H), electric door |
| Personnel door | 1 set, 800 X 2000mm (W X H) |
| Ceiling lighting | 10 sets, each 4 X 18W, 720W total |
| Sidewall lighting | 4 sets, each 2 X 18W, 144W total |
| Brightness | > 1,000Lux |
| Filters | Pre-filter, ceiling filter, floor filter, exhaust filter |
| Intake system | 11KW, 970rpm, 380V, 50Hz, SIEMENS motor |
| Exhaust system | 11KW, 970rpm, 380V, 50Hz, SIEMENS motor |
| Air volume | 35,000m3/h |
| Equipment empty loaded air speed | +/- 0.35m/s |
| Noise | <78db |
| Heats | Direct fired heating system |
| Maximum working temperature | 80°C |
| Controls | Inverter control, PLC, CE standard control box |
| Special item | Rated power: 25KW |
Features
| Airflow • Full downdraft airflow for spray and cure • Controlled airflow ceiling | Construction • White pre-coated galvanized steel • Dual-skin insulated panels filled with rock wool, 50mm thick • 600mm high plenum |
| Doors • Manual door, 3 wing entry door (2 + 1 structure) • Personnel door with observation window | Air handling unit • Intake and exhaust motors, 11kw, SIEMENS motor • Direct fired heating system |
| Filtration • Pre-filter: G3 grade pre-filter bag filter • Ceiling filter: F5 grade filter cotton, Model SP-600G • Floor filter: G2 grade fiberglass paint arrestor filters • Exhaust filter: Simple activated carbon filter mat, M type | Controls • Inverter soft start •PLC control •Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, cooling, motor overload and over-current protection, fan and heating system interlock control, over-temperature alarm indication |
| Special item - divider door between spray booth and preparation bay Electric plate roll-up door
| |
4) Packaging and loading
5) Engineering cases
6) Company information
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.
7) INFITECH at trade show
Send Message
