Model NO.
T200C+
Dimension
70 * 46*31cm
Effective Working Area
360mm * 230mm
Temperature Range
Room-Temperature -360 O C
Current
Alternating Current
Transport Package
Wooden Case
Specification
CE, ISO9000, ISO14000
Trademark
Torch
Origin
Beijing, China
HS Code
8514200009
Production Capacity
20 Set/Month
2023 SMT Mini Desktop lead free Welding reflow oven T200c+with Testing Temperature
Patented heater installation For heating evenly
Patented forced air cycling and ventilating technology® For extremely uniform temperature profiling across the board.
Patented oven door actuating device For no vibration after PCB welding.
Patented auto-open door technology For higher efficiency on production and the door matched with seal device for keeping temperature.
Active Ventilation function for exhaust gas emission.
Exhaust purifying function for environment-friendly.
T200C, T200C+ for SMD component 0201, QFP, PLCC ect
T200N, T200N+ for SMD component 0201, QFP, PLCC and specially for some more high precision component like more foot of QFP, high precision BGA component.
T200C and T200N for small mass production in factories.
T200C+, T200N+, + series it is suitable for school, R&D center of enterprise, of course
Which depends on customer's board situation and operation requirement.
TORCH brand desktop reflow oven has got purchse order from TOP 500 enterprises: GE, CISCO, 3M, TI, NVIDIA, Nortel Network ect last year, especially GE and CISCO, totally purchased for more than 12 sets.
Specification:
PC interface software control and visional operation
Real-time temperature testing function fills the blank of SMT industry overall world for adjusting the temperature at the real time.
Patented heater installation For heating evenly
Patented forced air cycling and ventilating technology® For extremely uniform temperature profiling across the board.
Patented oven door actuating device For no vibration after PCB welding.
Patented auto-open door technology For higher efficiency on production and the door matched with seal device for keeping temperature.
Active Ventilation function for exhaust gas emission.
Exhaust purifying function for environment-friendly.
Application:
T200C, T200C+ for SMD component 0201, QFP, PLCC ect
T200N, T200N+ for SMD component 0201, QFP, PLCC and specially for some more high precision component like more foot of QFP, high precision BGA component.
T200C and T200N for small mass production in factories.
T200C+, T200N+, + series it is suitable for school, R&D center of enterprise, of course
Which depends on customer's board situation and operation requirement.
TORCH brand desktop reflow oven has got purchse order from TOP 500 enterprises: GE, CISCO, 3M, TI, NVIDIA, Nortel Network ect last year, especially GE and CISCO, totally purchased for more than 12 sets.
Specification:
Temperature control segment: | 40 segment The segment can be set in computer according to the actual requirement. |
| Temperature-zone numbers: | Single-zone and multi-segment |
| Temperature control system | PC control system, SSR non-contact output |
| Temperature accuracy | +/- 2 ºC |
| Warm-up time | 3min |
| Temperature range | Room-temperature -360 ºC |
| Heating supply | Infrared ray + Hot air convection |
| Effective working table area | 360mm * 230mm (more than A4) |
| Welding time | 3min +/-1min |
| Temperature curve | It can be set, adjusted and tested according to the actual requirement. |
| Cooling system | Transverse flow equal cooling |
| Rated voltage | AC single-phase, 220V; 50Hz |
| Rated power | 3.8KW Mean power: 1.6kw |
| Weight | 39 kg |
| Dimension | Length*width*height 700 * 460 *310mm |
Send Message
