Model NO.
V-160
Power
Electric
Total Volume
0.29m³
Warranty
2 Years
Certificates
CE&ISO
Working Range
63-160mm
Max Pressure
8MPa
Welding Materials
PE, PP, HDPE, PVDF
Transport Package
Plywood Box
Specification
3 plywood boxes
Trademark
RIYANG
Origin
China
HS Code
8515219900
Production Capacity
500 Units / Month
Application:
Infrastructure, Contruction
Cooling Way:
Air Cooling
Control:
Hydraulic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
RIYANG BUTT FUSION WELDING MACHINE V160
Riyang V series is on-site hydraulic butt fusion welding machine.
It is used to butt weld pipe and fittings such elbow, tees, wye and flange necks without any additional equipment by simply adjusting the clamps and drag bar.
It is suitable for welding plastic pipe and fittings made of HDPE, PP, PVDF and other thermoplastics material.
| Technical Parameters | V160 |
| Welding Range O.D. | 50-160 mm |
| Power Supply | (110V*) 220V, 50/60Hz |
| Rated Power | 2.5 kw |
| Working Pressure Range | 0-80 bar |
| Piston Area | 6.27 cm2 |
| Temperature Range | Max. 320ºC |
| Packing dimension | 820*400*380 mm |
| 440*400*520 mm | |
| 650*340*380 mm | |
| Gross Weight | 133 kgs |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont from USA coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
Featured by
- We use Dupont from USA coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
Hydraulic Power Station
Featured by
- Solid relays have a bigger load capacity and working in more stable situation, which has much longer life.
- The circuit breaker works with electricity leadkage protection switch. Including the earth wires, there're 2 elements to activate the protection when electircity is leaking.
- Non-fan motor (small size machines), water proof, sand-proof and dust-proof at higher level. The motor provides sufficient/full power to provide support for hydraulic power. i.e. V355 could reach to maximum 80bar.
Featured by
- Solid relays have a bigger load capacity and working in more stable situation, which has much longer life.
- The circuit breaker works with electricity leadkage protection switch. Including the earth wires, there're 2 elements to activate the protection when electircity is leaking.
- Non-fan motor (small size machines), water proof, sand-proof and dust-proof at higher level. The motor provides sufficient/full power to provide support for hydraulic power. i.e. V355 could reach to maximum 80bar.
You may be concerned:
V160mm Manual Butt fusion welding machine PEWELDBANK Data Logger Pipe Roller Support
Send Message
