Model NO.
V160CNC
Power
Electric
Total Volume
0.35m³
Warranty
2 Years
Certificate
CE, ISO9001
Voltage
220V (*110V)
Transport Package
Plywood Box
Specification
3 plywood boxes
Trademark
RIYANG
Origin
China
HS Code
8515219900
Production Capacity
500 Units / Month
Application:
Infrastructure, Construction
Cooling Way:
Air Cooling
Control:
Automatic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
RIYANG BUTT FUSION WELDING MACHINE V160 CNC
The RIYANG V-CNC series automatic hydraulic butt welding machines are applied to joint PE, PP, PPR and PVDF pipes and moulded fittings. Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.
| Technical Parameters | V160 CNC |
| Welding Range O.D. | 50-160 mm |
| Power Supply | (110V*) 220V, 50/60Hz |
| Rated Power | 2.5 kw |
| Working Pressure Range | 0-80 bar |
| Piston Area | 6.27 cm2 |
| Temperature Range | Max. 320ºC |
| Packing dimension | 820*400*380 mm |
| 440*400*520 mm | |
| 650*340*380 mm | |
| Gross Weight | 133 kgs |
RIYANG V-CNC series Characteristics
| Welding control system | Fully monitored by CNC control unit |
| Data logging capacity | 2000 reports |
| Welding monitoring system | Ambient temperature, input voltage, heating temperature, welding pressure, welding times, heating operation, trimming operation, memory control |
| Welding standard | DVS, ISO, WIS, UNI and others upon request |
| Languages | Available upon request |
| Approval certification | CE, ISO9001:2008 |
| Warranty period | 2 years |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
Featured by
- We use Dupont for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
V-CNC Series
Featured by
- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient hydraulic power during welding procedure, but also it makes sure the precise control. And most importantly, it greatly reduce the weight of control box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic control unit, including sockets for trimmer tool and heating plate. No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.
- All RIYANG V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrade are available for remote control.
- When heating plate hook up with machine chassis, inserting or release the heater will be controlled remotely by hydraulic unit, which is same as trimmer. These characteristics prevent the operators from being injured.
Featured by
- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient hydraulic power during welding procedure, but also it makes sure the precise control. And most importantly, it greatly reduce the weight of control box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic control unit, including sockets for trimmer tool and heating plate. No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.
- All RIYANG V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrade are available for remote control.
- When heating plate hook up with machine chassis, inserting or release the heater will be controlled remotely by hydraulic unit, which is same as trimmer. These characteristics prevent the operators from being injured.
Established as a trader in the year of 2012, started from the year of 2018, RIYANG FUSION MANUFACTURING LIMITED upgraded as a professional manufacturer and exporter that is concerned with the design, development and production of HDPE Pipe welding machine. We are located in WUXI, near SHANGHAI, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.
As a result of our high-quality products and outstanding customer service, we have gained a global sales network reaching Russia, Germany, Australia, Middle East, and Latin America. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Q&A:
1. PAYMENT TERMS
We accept 30% TT deposit and 70% balance payment against photo before delivery or 100% TT in advance.
2. LEAD TIME
Usually, we have plenty of stock for V355 and below, and keep max. 3units for V450 and V630. As to V800 and above, we'll arrange production according to the actual orders.
3. WARRANTY
2 YEARS. During the warranty period, RIYANG authorized dealer and RIYANG will totally cover the responsibility to fix the machine; Claim parts usually could be couriered to clients within 3days since receiveing the claim. Express fee will be borned by RIYANG.
4. CAN YOU DO CUSTOMIZED DESIGN
YES. RIYANG has its own design and technical team that can undertake OEM and ODM, but there are quantity requirements, please contact our sales consultant for more information, thank you.
5. CAN YOU PROVIDE TRAINING CLASS ?
1. Customers are welcome to come to our factory for 1-2 weeks of training, in addition to air tickets and hotels, RIYANG can afford meals and local transportation costs.
2. We can also arrange for technical personnel to fly to the customer's local to do on-site training, for a period of 1-2 weeks, customers bear air tickets, hotels, catering, as well as technical training fees, please contact our sales consultant for details.
3. RIYANG offers online training in English and Spanish, which requires an appointment in advance.
6. HOW COULD BE YOUR DISTRIBUTOR AT LOCAL?
RIYANG welcomes customers from all over the world to negotiate agency business, but for agents, we have specific requirements, details please contact our sales consultant, thank you!
Send Message
