Model NO.
UN1
Model No
Un1
Rated Input Voltage
380V
Max Short Current
11000-35000A
Transport Package
Non-Log Paking
Specification
high quality
Trademark
Durowelder
Origin
China
Production Capacity
500/Years
Welding Range:
Customer
Cooling Way:
Water Cooling
Control:
Automatic
Frequency Range:
Intermediate Frequency
Electric Current:
AC
Type:
Resistance Butt Welder
Main Applications: Joint steel wire, plate, pipe rings etc.
The Main Features of Resistance Butt Welder and Main Advantages:
1. AC Resistance Butt Welding is the welding method that the end surfaces of two parts are pressed tightly, and the resistance heat is used to heat up the surfaces to the plasticized status, then the upsetting force quickly press them together more tight again or without applying the upsetting force pressure, just only hold on the welding pressure to complete the welding.
2. Compared to Flash Butt Welding, Resistance Welding is much easily to for worker use and operate, the cost is much lower, welding productivity is also higher.
3. The welded joint is smooth. And the welding burrs are small.
4. The structure is designed compactly which is very easily to be adjusted to weld different parts. The special butt welding control circuits ensure the welding quality.
5. Mainly used for butt welding various metal material with welding section area less than 250mm, such as iron, wires, pipes, etc.
Main Technical Parameter:
The Main Features of Resistance Butt Welder and Main Advantages:
1. AC Resistance Butt Welding is the welding method that the end surfaces of two parts are pressed tightly, and the resistance heat is used to heat up the surfaces to the plasticized status, then the upsetting force quickly press them together more tight again or without applying the upsetting force pressure, just only hold on the welding pressure to complete the welding.
2. Compared to Flash Butt Welding, Resistance Welding is much easily to for worker use and operate, the cost is much lower, welding productivity is also higher.
3. The welded joint is smooth. And the welding burrs are small.
4. The structure is designed compactly which is very easily to be adjusted to weld different parts. The special butt welding control circuits ensure the welding quality.
5. Mainly used for butt welding various metal material with welding section area less than 250mm, such as iron, wires, pipes, etc.
Main Technical Parameter:
| Parameter | Rated Capacity | Rated Input Voltage | Rated Frequency | Max Short Current | Rated Duty Cycle | Max Clamping Force | Max Upsetting Force | Cooling Water Required | Dimensions L*W*H | Average Weight |
| Model No. | ||||||||||
| UN1-25 | 25KVA | 380V | 50/60Hz | 11000A | 50% | 3900N | 1500N | 150L/H | 90*80*120CM | 300Kg |
| UN1-35 | 35KVA | 380V | 50/60Hz | 15000A | 50% | 3900N | 1500N | 150L/H | 90*80*120CM | 350Kg |
| UN1-50 | 50KVA | 380V | 50/60Hz | 19000A | 50% | 3900N | 1500N | 150L/H | 90*80*120CM | 400Kg |
| UN1-75 | 75KVA | 380V | 50/60Hz | 23500A | 50% | 6100N | 2500N | 200L/H | 90*80*120CM | 450Kg |
| UN1-100 | 100KVA | 380V | 50/60Hz | 26000A | 50% | 6100N | 2500N | 200L/H | 90*80*120CM | 500Kg |
| UN1-150 | 150KVA | 380V | 50/60Hz | 31000A | 50% | 8000N | 3900N | 300L/H | 135*80*160CM | 550Kg |
| UN1-200 | 200KVA | 380V | 50/60Hz | 35000A | 50% | 8000N | 3900N | 300L/H | 135*80*160CM | 650Kg |
If you want to know more information about our products, please feel free to contact me!
Send Message
