Model NO.
CNEBIKES
Max Torque
45n.M
Axle
170mm/190mm
Wheel Size
26′′x4 /26′′x3
Hall Sensor
with
Efficiency
80%
Transport Package
Carton Package
Specification
CE approved
Trademark
CNEBIKES
Origin
China
HS Code
8501310000
Production Capacity
5000sets/Month
Type:
Conversion Kits
Voltage:
48V
Rated Power:
1000W
Construction:
Brushless Gearless Motor
Position:
Front Motor/Rear Motor
Rpm:
100-500
48V 500W 1000W Brushless Gearless Hub Motor ,Electric Fat Bike DIY Conversion Kits fat ebike tire 26x4.0
CNEBIKES Fat Tyre Motor Kt With
1. 48v 500w/1000w hub motor
2. 26*4.0 double wall alloy rims,2.6mm spokes
3. Twist throttle or thumb throttle
4. Brake(for both side power off)
5. 48v 22A/26A controller
6. Speed Sensor
7. Use manual with ties also widing pipe
Why do we use a Double Walled rim and heavy duty 12Gauge spokes??
In the beginning we tried various kits and many of the brush less motors were very good motors. The problem with most of the conversion kits available are that they are spoked incorrectly, use a single walled weak rim., have spokes that are the wrong length causing the spokes to be bent in an "s" shape. Simply put bicycle wheels were not made for this type of torque on them and on occasion you will need to tighten your spokes until they finally "seat" themselves.
Warranty
motor--->2 years(guarantee replacement in first year, guarantee repair in the next year.)
battery---->1years(guarantee replacement.),
other parts---->half an year
CNEBIKES Fat Tyre Motor Kt With
1. 48v 500w/1000w hub motor
2. 26*4.0 double wall alloy rims,2.6mm spokes
3. Twist throttle or thumb throttle
4. Brake(for both side power off)
5. 48v 22A/26A controller
6. Speed Sensor
7. Use manual with ties also widing pipe
| Technical Parameters | ||
| Rated Power | 500W | 1000W |
| Nominal Voltage | 36V/48V | 48V |
| Position | Front Motor/Rear Motor | Front Motor/Rear Motor |
| Construction | Brushless Gearless Motor | Brushless Gearless Motor |
| RPM | 100-380 | 100-500 |
| Max Torque | 32N.m | 45N.m |
| Efficiency | 83% | 83% |
| Hall Sensor | With | |
| Axle | 170mm(Front)/190mm(Rear) | 170mm(Front)/190mm(Rear) |
Why do we use a Double Walled rim and heavy duty 12Gauge spokes??
In the beginning we tried various kits and many of the brush less motors were very good motors. The problem with most of the conversion kits available are that they are spoked incorrectly, use a single walled weak rim., have spokes that are the wrong length causing the spokes to be bent in an "s" shape. Simply put bicycle wheels were not made for this type of torque on them and on occasion you will need to tighten your spokes until they finally "seat" themselves.
Warranty
motor--->2 years(guarantee replacement in first year, guarantee repair in the next year.)
battery---->1years(guarantee replacement.),
other parts---->half an year
Send Message
