Model NO.
MD-SWBW2030
Production Capacity
100set/Month
Ultrasonic spot welder metal
Equipped with high-performance ultrasonic metal spot welding power supply, automatically tracking the frequency of the
transducer, with two control modes of time and energy;
Ultrasonic welding has low requirements on the metal surface, no need to scrape the oxide layer or electroplating layer, and the welding efficiency and quality are high;
The welding material does not need to be melted, does not change the material characteristics, and has no pollution;
It can realize the welding between different metal materials, such as nickel+copper,copper+aluminum,nickel+aluminum,etc.;
After welding, the metal material conducts electricity, has good thermal conductivity, and extremely low resistivity, which is
suitable for welding of conductive materials.
transducer, with two control modes of time and energy;
Ultrasonic welding has low requirements on the metal surface, no need to scrape the oxide layer or electroplating layer, and the welding efficiency and quality are high;
The welding material does not need to be melted, does not change the material characteristics, and has no pollution;
It can realize the welding between different metal materials, such as nickel+copper,copper+aluminum,nickel+aluminum,etc.;
After welding, the metal material conducts electricity, has good thermal conductivity, and extremely low resistivity, which is
suitable for welding of conductive materials.
Advantage
After welding, the metal material conducts electricity, has good thermal conductivity, and extremely low resistivity, which is
suitable for welding of conductive materials.
Application
Battery pack connection, aluminum sheet, copper busbar connection;
Automobile wiring, wiring terminal, multiple wiring welding;
Welding of wiring and electronic components, connectors, terminals;
Welding of different metals such as Al Cu, Al Ni, Cu Ni, Ti Al, etc Copper pipe seals of refrigerators;
Welding of Ni mesh, Al mesh, Ni foil, Cu Al foil, and solar board.
Specification
Model | MD-SWBW2030 | MD-SWBW2040 | MD-SWBW2070 | MD-SWBW2080 | MD-SWBW4010 |
Ultrasonic frequency | 20KHz | ||||
Operating Voltage | AC220V/50Hz | ||||
Ultrasonic power | 3000W | 4000W | 7000W | 8000W | 1000W |
Air pressue | 0.4MPa~0.6MPa | ||||
Operation interface | 4.3 inch/7 inch touch screen | ||||
control mode | time/energy/altitude | ||||
Maximum welding stroke | 30mm | ||||
rack size | 500*180*400mm | ||||
Electric box size | 450*135*140mm | ||||
Weight | 65kg | 85kg | 90kg | 100kg | 55kg |
Factory
Send Message
