Model NO.
XTRAMIG-200 SYN
Rated Input Frequency (Hz)
50/60Hz
Non-Load Voltage (V)
60V
Rated Duty Cycle (%)
60%
N.W./G.W. (Kg)
11.0kg/17.0kg
Transport Package
Carton
Specification
520*320*400mm
Trademark
FENGBAO
Origin
Taizhou, China
HS Code
8513190000
Production Capacity
20000PCS/Month
Cooling Way:
Air Cooling
Control:
Automatic
Frequency Range:
High Frequency
Electric Current:
DC
Input Voltage:
220V
Suggested Electrode Max:
5mm
inverter XTRAMIG 200 mma tig mag gas or no gas aluminum 220V with LCD mig welding
1. ALL-IN-ONE function
XTRAMIG series welder combos with MIG, MAG, TIG and MMA welding function in one unit.
With the quick Synergic regulation of welding parameters, it can do the welding jobs easily. The intelligent and
automatic control of the arc, moment by moment, maintains high welding performance in all working conditions,
with different materials and/or gases. The operator can also intervene manually along the arc length.
XTRAMIG series welder combos with MIG, MAG, TIG and MMA welding function in one unit.
With the quick Synergic regulation of welding parameters, it can do the welding jobs easily. The intelligent and
automatic control of the arc, moment by moment, maintains high welding performance in all working conditions,
with different materials and/or gases. The operator can also intervene manually along the arc length.
2. VISIUAL OPERATING INTERFACE WITH LCD SCREEN
All the values that are shown and can be selected according to the welding mode, welding material with
recommended gas, welding wire diameter, welding current, wire feeding speed and welding voltage.
All the values that are shown and can be selected according to the welding mode, welding material with
recommended gas, welding wire diameter, welding current, wire feeding speed and welding voltage.
3. SMART THERMAL CONTROL (COLD WELDING FOR THIN PLATE)
This is enabled automatically when the thickness selected is less or equal 1.5mm.
The particular instantaneous control of the welding arc and the ultra-rapid correcting of parameters minimize
current spikes, something that is characteristic of Short ARC transfer procedures, to the advantages of a low
thermal load on the piece to be welded. The result, on the one hand, is reduced deformation of materials and, on
the other, a fluid and accurate transfer of the weld material and creation of a welding seam that easy to model
This is enabled automatically when the thickness selected is less or equal 1.5mm.
The particular instantaneous control of the welding arc and the ultra-rapid correcting of parameters minimize
current spikes, something that is characteristic of Short ARC transfer procedures, to the advantages of a low
thermal load on the piece to be welded. The result, on the one hand, is reduced deformation of materials and, on
the other, a fluid and accurate transfer of the weld material and creation of a welding seam that easy to model
4. ADVANCED SETTING FOR MMA WELDING
With MMA mode, advanced setting can be selected, it's helpful for welding all electrodes.
- VRD (Voltage Reduced Device) ON/OFF
- ANTI-STICK ON/OFF
- HOT START 0 - 10
- ARC FORCE 0 - 10
5. ADVANCED SETTING FOR TIG WELDEING (OPTIONAL)
We offer optional advanced setting for PRE-GAS and POST-GAS for Lift TIG welding.
With MMA mode, advanced setting can be selected, it's helpful for welding all electrodes.
- VRD (Voltage Reduced Device) ON/OFF
- ANTI-STICK ON/OFF
- HOT START 0 - 10
- ARC FORCE 0 - 10
5. ADVANCED SETTING FOR TIG WELDEING (OPTIONAL)
We offer optional advanced setting for PRE-GAS and POST-GAS for Lift TIG welding.
6. SIMPLE TO USE
Send Message
