Model NO.
MD-IDC9580
HS Code
8015809090
Production Capacity
200PCS/Yearpcs/Year
Inner diameter slicer and optical edger
Details
Inner circle fully automatic slicing machine is using inside circle to cut a variety of semiconductors, crystal, ceramic, NdFeB magnetic material.
Installed in the spindle, the edge-type Diamond blade cutter is high-speed rotating, the table was feeding by computer control of horizontal and vertical movement, the material on the fixture of the table was cut into the required product.
We have the semi-automatic/fully automatic inner circle clicking machine, within a circle slicer two kinds of specifications, a variety of models. For the Automatic Slicer inner circle. a worker can operate about 16 units slicer at the same time
- Product description:
MD-IDC9580 Inner diameter circle slicer
Details
Inner circle fully automatic slicing machine is using inside circle to cut a variety of semiconductors, crystal, ceramic, NdFeB magnetic material.
Installed in the spindle, the edge-type Diamond blade cutter is high-speed rotating, the table was feeding by computer control of horizontal and vertical movement, the material on the fixture of the table was cut into the required product.
We have the semi-automatic/fully automatic inner circle clicking machine, within a circle slicer two kinds of specifications, a variety of models. For the Automatic Slicer inner circle. a worker can operate about 16 units slicer at the same time
- MD-IDC9580
| Main technical parameters | |
| Max machining size(mm): | Φ95 ×80mm |
| Cutting speed (²/): | 3-6(²/) |
| Degree of balance sheets by cutting deviation(mm): | ±0.005 |
| Cutting film thickness(mm): | ≥0.30 |
| The thin-cut tolerance (mm): | ±0.005 |
| Horizontal stroke(mm): | 120 |
| Longitudinal travel(mm): | 100 |
| Spindle Electrical: | 3 Phase 1.1kw |
| Spindle Speed (r/min): | 2800Rev / min |
| Adjust the amount of work clamp: | |
| Horizontal angle: | ±45º |
| Pitch angle of elevation: | ±10º |
| Vertically(mm): | 20 |
| Cooling tank capacity(kg) : | 50kg |
| Cooling tank motor: | 3 Phase 0.12kw 2780r/min |
| Power: | Three-phase four-wire 50Hz 380V |
| Dimensions(mm): | 1130mm*850mm*1500mm |
| Weight(kg): | ~1400(kg) |
Send Message
