Voltage
380V
Polishing Wheel Diameter
800 (mm)
Rated Input Power
3700 (W)
No Load Speed
1450 (Rpm)
Transport Package
Carton/Wooden
Specification
CE /IOS
Trademark
COLO
Origin
China
HS Code
8424899990
Production Capacity
200PCS/Month
Type:
Polish Machine
Power Source:
Electricity
Delivery Date:
2working Days
Warranty:
12 Month
Packaging Details:
Wood Case
Sizes:
as Request
Through Tub Type Vibratory Metal Finishing Machine
Trough type vibratory finishing system is also know as Deburring & Polishing System, Deburring Machine, vibratory finishing machine, Metal Finishing Machine, Finishing Equipment.
Medium and workpiece roll flow is better, suitable for processing long workpiece
Features: large output, high efficiency, energy saving, long life, low noise, no pollution, high quality.
1, the use of inertial exciter (vibration motor eccentric block) generated by the vibration deviation, so that the workpiece and the abrasive in the machine work tank movement, so that the workpiece and the abrasive in a direction of operation, friction, to deal with the effect of surface treatment.
2, for large quantities of small, small parts of the light finishing the whole processing, the treatment effect is good, time-consuming short.
3, the process does not destroy the original parts of the size, shape, for a variety of shapes of the workpiece finishing light finishing.
4, the container lining with PU material (polyurethane); to prevent the workpiece and metal direct contact, but also greatly extend the life of the machine.
5, easy to operate, in the course of the work can be spotted at any time the processing of parts, and the other optional PLC control box, you can achieve automated operation.
1, the use of inertial exciter (vibration motor eccentric block) generated by the vibration deviation, so that the workpiece and the abrasive in the machine work tank movement, so that the workpiece and the abrasive in a direction of operation, friction, to deal with the effect of surface treatment.
2, for large quantities of small, small parts of the light finishing the whole processing, the treatment effect is good, time-consuming short.
3, the process does not destroy the original parts of the size, shape, for a variety of shapes of the workpiece finishing light finishing.
4, the container lining with PU material (polyurethane); to prevent the workpiece and metal direct contact, but also greatly extend the life of the machine.
5, easy to operate, in the course of the work can be spotted at any time the processing of parts, and the other optional PLC control box, you can achieve automated operation.
Send Message
