Certification
Working principle
Dust laden fume are sucked into the extractor by the suction force induced by fan's working, with deflector fume's flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge's interior and then discharged into workshop directly or out of the workshop through pipe line.
Product introduction
This product adopted world leading imported material of wood fiber filtering, for dust (above 0.5μm) filtration efficiency reaches 99.9%, meanwhile maintain a high air flow. It is ideal for purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials. Compared with the same product in the world, it's quite worthwhile in terms of quality and price.
Main feature
1.PTFE coating micro particle filtration, filtration efficiency reaches 99.99%, high air flow
2.for purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials
3. the extractor can clean dust automatically.
Technical parameters
| serial | item | parameter |
| 1 | fan type | centrifugal fan |
| 2 | air flow | 3000±100m3/h |
| 3 | motor power | 3.0kw |
| 4 | power supply | 380V/50Hz |
| 5 | filtration area | 36m² |
| 6 | number of filter cartridges | 2 pieces |
| 7 | filter medium | polyester |
| 8 | filtration efficiency | >99.9% |
| 9 | number of solenoid valves | 2 pieces |
| 10 | compressed air | 5~6bar |
| 11 | compressed air volume | 7L |
| 12 | noise | 75±5dB(A) |
| 13 | weight | 550±20kg |
| 14 | dimensions (excluding fan) | 1400×1150×1900mm |
Company profile
Exhibition
Send Message
