KSZ-1.5S Portable Welding Fume Extractor Dust Filter with One Suction Arm
Mobile welding fume extractor are designed to be utilized as a respiratory safety engineering control during a variety of welding applications, including TIG welding, MIG welding, maintenance welding, production welding, clean room welding, stick welding, stainless steel tank welding, rapid location welding, and much more. It has two directional and two rotary polyurethane casters with brake device for easy moving and stationing.
The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purification, and HEPA 's filtration efficiency can reach 99.9%. As the filtering precision of the main filter cartridge reaches the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor.
1. PLC panel control system, easy to operate
2. Depending on needs, 2m, 3m flexible suction arm are available.
3. Automatic cleaning way.
4. CE certification, EMC certification
5. Operating controls conveniently
| No. | Item | Parameter |
| 1 | Fan type | Centrifugal fan |
| 2 | Treatment of air flow | 1500 m3/h |
| 3 | Motor power | 1.5 kW |
| 4 | Power supply | 380V/50Hz or 220V/60Hz |
| 5 | Filtration area | 10 m2 |
| 6 | Number of filter cartridges | 1 piece |
| 7 | Filter medium | Polyester+PTFE |
| 8 | Filtration efficiency | >99.9% |
| 9 | Noise | ≤72±5dB(A) |
| 10 | Compressed Air | 0.5~0.6MPa |
| 11 | One suction arm | Ø160mm*3m |
| 12 | Weight (excluding suction arm) | 210±5KG |
| 13 | Dimensions(excluding suction arm) | 700(W)x800(L)x1600(H)mm |
Send Message
