About us:
We are the leading manufacturer specialized in designing and manufacturing different kinds of dust collectors in China with the experience of more than 10 years, manufacturing according to theISO9001:2008 quality control system guidelines and CE certification. We help our customers develop special dust collectors for their application and OEM service offered.
Our bag type filter is a kind of small and medium-sized pulse blowback dust collector. The most high efficient dust removal for your dust prevention circumstance. To adopt pulse blowing dedust and PLC controller, the automatic working can be come true. The advantage is reliable operation, easy maintenance and management. Through our design program and every kind of detectors signal, we can see every parts of the equipment during it working. Our dust collector equipment often can be widely used in cement, metallurgy, electric power, chemical and other industries of dust gas purification and fine powder material recycling collection.
Structure Composition:
The customized dust catcher are composed by the filter chamber housing, clean air chamber enclosure, filter bag, filter cage, pulse injection device, ash hopper, screw conveyor and discharger, etc. At the end, it needs centrifugal fan for power system. In another type of dust catcher, the dedusting job can be done by every chamber isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller.
Advantageous characteristics:
1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag.
2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories.
3. It uses separate chamber offfline dust clearing with high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced.
4. The overhaul and bag replacement can be carried out for separate chambers under the condition that system blower and system run normally.
5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness.
6. The case uses airtightness design and it carries out leak detecting with oil and reduces air leak to the maximum extent.
7. The whole set of equipment is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.
Technical parameters:
Model
| PHC154-2X11 | PHC154-2X12 | PHC154-2X13 | PHC154-2X14 | PHC154-2X15 | |
Treatment wind capacity (m3/h) | 488000 732000 | 532000 798000 | 577000 865000 | 621000 931000 | 665000 1000000 | |
Filtering area (square meters) | 10208 | 12064 | 12064 | 12992 | 13920 | |
Filter bag quantity (pcs) diameter 130X6000mm | 3388 | 4004 | 4004 | 4312 | 4620 | |
Filtration velocity (m/min) | 0.8-1.2 | |||||
Resistance (Pa) | less than 1500 | |||||
Entrance dust content (g/N m3 ) | less than 1000 | |||||
Exit emission concentration (mg/ N m3 ) | less than 50 (filter bags made in China); less than 30(filter bags made in foreign countries) | |||||
Negative pressure sustained by dust collector (Pa) | 8000 | |||||
Dust cleaning pressure | Pressure (Mpa) | 0.2-0.6 ( diameter 3 inch Flood Pulse Valve used) | ||||
Compressed air | Air consumption (m3/min) | 5.0 | 5.0 | 5.5 | 6.0 | 6.0 |
Power consumption (KW) | 30 | 30 | 30 | 30 | 30 | |
Equipment weight (T) | 311.7 | 340.6 | 369.2 | 398.5 | 424.7 | |
Detail photos:
Send Message
