Product details information:
·RF working frequency: 2.4-2.4835G
·RF Modulation Mode:QPSK MD301RE,16QAM MD301SE/AV
·Antenna Impedance :50ohm
·Signal transmission distance:100M
·Video signal format type:CVBS
·P/N system resolution:720x576(NTSC)/720x480(PAL)
·Video frame:30fps/25fps
·Video output: 1.0vp-p, 75ohm
·Video SNR S/N:50dB
·Audio Output:1.0±0.2Vp-p,10Kohm
·Audio SNR S/N:58dB
·Voltage input:DC 12-24V
·Power:2.4W
·Waterproof grade:IP69
·Vibration Rate:10G
·One wireless receiver support to pair 4 wireless transmitters at most
·Receiver box has 4 trigger cables to select with different wireless signal from 4 transmitters
·Operation Temperature:-30ºC-70ºC.RH95%Max
·Storage Temperature:-30ºC-70ºC.RH95%Max
Instruction guide for reference:
1.Plug in the camera connection power cable,press "POWER ON" button, the green indicator light be turned on.Then continuously press "POWER ON" button two times,the blue light be turned on,enter into pairing state.
2.4P aviation connector on the receiver box side to be connected with monitor,plug in DC12-24V power,the red light be turned on.
3.When the trigger cable of CH1 on the receiver box be triggered by DC12-24V,the monitor showing "Wait TX signal ",long press"POWER ON" button approximate 3 seconds,the red and blue indicator light be turned on alternately,enter into pairing state.
4.Only when the wireless camera and receiver box are both on the pairing state at the same time,the signal can be pairing sucessfully.In this case, the blue indicator lights on camera and receiver box be turned on,the monitor has picture output.
5.Remove CH1 connection,plug in CH2 with DC 12-24V,according to the above 3rd operating step.The receiver box be connected with the secondary camera.In a similar manner,one receiver box can be connected with four wireless cameras at the same time.But it can trigger only one channel of CH1/CH2/CH3/CH4,and select one channel video output to the monitor.
6.When the 4 channel trigger signal connected with DC12-24V at the same time,the video output priority is CH1>CH2>CH3>CH4.
7.When the camera battery is running low power,use the charging adapter in the kit to charge the battery. The red indicator light will be turned on when charging.
Company Introduction:
BRvision Technology Co.,LTD is a manufacturer and company serving the Heavy-duty truck and commercial vehicle industry with vehicle safety systems, including reversing camera, monitor, dash camera, parking sensor and mobile DVR etc.
BRvision was established in 2008, designed the first OE mirror monitor & camera for Chrysler. Our new factory was established in Songgang, Shenshen in 2012. In these year, all the test equipment installed in factory, and we also produced OE camera for Suzuki. In 2013, we past the ISO, set up our R&D department, also the overseas sales office established in Shajing, and the ERP system online this year.
We do 100% exporting, most of our products were exported to Western EU, Oceania and North America. We offer one global price, which is fair to each client.
Our mission is providing you a safety solutions on vehicles ! Welcome to visit our factory !
Why choose BRvision?
As a up-rising star in this field, our advantages as following:
Brvision has been professional Vehicle camera system manufacturer with rich experiences to serve OEM and ODM for all top famous brands in this field.
All relative Certificates in this field approval: E-mark, FCC,CE, ISO9001, E9, IP69K. Now we are also applying for TS16949.
Good quality control, our products need to be doing tests such as Salt Spray Test, High&Low Temperature,humidity Test, Aging Test,Vibration Test ,Waterproof Test, Viewing angle Test,Color Test, etc.
We have self-design team for new products development, that's why we are good at OEM/ODM projects. Prodution ERP system to control the raw material & production arrangement, sales ERP system for better customer service, R&D ERP system for products innovation management.
