Introduction
the main function is to display the car dashboard information(e.g.speed,driving direction,local time,driving distance,driving time ),and keep the driver's eyes always on road to avoid the dangerous of lowering down head to read the dashboard.
Main Functions&Features
1.Work for all the vehicles,easy installation,plug and play
2.TFT LCD multi color smart display
3.The language can be changed
4.Multi function display or simple function display can be switched freely
5.New functions: accelerating competitive mode ,Brake performance test
6.Rich Contents:driving speed,voltage,single driving distance,total driving distance,driving time,over speed alarm,freely switch between kilometers&miles.
Technical Parameters:
Environment temperature: -40c- + 80c
atmospheric pressure 86-106KPa
Relative Humidity: 10% -95%
environmental noise <= 60dB (A)
Alarm sound level: >=30dB (A)
Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product size: 73*68*46(cm)
Product Weight: 50 g
Troubleshooting
1.The screen without any display,and no power
Start the car engine;check if the cable line is tight;or connect the USB to the computer to check
2. Inaccurate time
When the device search the satellite successfully(the default 8:00 will change to China local time), set it to your local time and save and exit.
3.Inaccurate Speed
When the product is power on,long press in the button to enter into the menu option,and right push once switch to setting,then short press in the button to the menu,and right push the button switch to the speed adjust option.(if the dashboard shows 100,and the device shows the 101,change the default value at 106%)
4.Over speed alarm
Default alarm is 150KM/H,please refer to the setting to change the value.
5.The device cannot auto power off
After vehicle turns off,the device still display the speed,switch the setting to Speed Offset,and adjust the value same as the device speed.(if the device shows 5KM/H after the vehicle turns off,then change the speed offset at 5KM/H)
6.Wrong operation lead to crashes
Do a factory set
Send Message
