Model NO.
GT-G
Driving Type
Hydraulic
Capacity
<500kg
Persons
1-2 Persons
Speed
<1.00m/s
Control Mode
Push-Button Control
Position of Computer Room
Without Computer Room
Elevator Door
Safety Steel Bar
Door Knife
N/a
Attendant
Without Attendant
Max. Travel Height
6000mm
Load Capacity
250-350
Platform Size
1430 X 900
Control
Automatic / Point Control
Material
Painted Steel/ 304#Hairline Ss
Auto Flat
Available
Safety Device
Options If Needed
Emergency Stop
Yes
Install
with/ Without Pit
Transport Package
Wooden Case
Specification
GT-G 250-350kg Wheelchair Lift
Origin
China
HS Code
8428101001
It's obvious what a vertical wheelchair lift can do. Having this equipment at home or in public buildings can help those with physical difficulties and the elderly to achieve greater freedom of movement and independence. The same thing can be said of traditional ramps. Lifts however are easier and less stressful to operate or use. In some cases, they are also safer to use than other types of platforms.
Homeowners and building planners have the alternative of setting up elevators. These however are often quite expensive and require more intensive maintenance. Vertical lifts are a logical choice when cost is an issue. Our GT-G wheelchair lift consists of a platform with high side walls, an upper landing gate, a platform mounted gate, a drive system and easy-to-use operating controls. The platform walls and the platform gate travel with the platform creating a barrier around the passenger. This wheelchair lift can be installed with little to no site modifications. Its hydraulic system offers passengers smooth and comfortable transportation and different safety devices remove every hiding risk. Precisely designed configuration uses very square inch on the ground scientifically, making our product reliable and stable.
So, stop stalling and just call our sales department. Our staff will try their best to design and produce the most suitable wheelchair lift for you or those you care of. GT-G wheelchair lift, the best choice for physically challenged people.
Platform size | 1426mm(L)* 900mm(W)(or customized) | |
Dimension | 1426mm(L)*1250mm(W)* Travel height +700~1100 mm(H) | |
Max Platform height | 6000mm | |
Mini Platform height | 80mm | |
Configuration | Front doors in line / Open through / 90°adjacent entrances | |
Speed | 70mm/s | |
Load capacity | 250KG-350KG | |
Control system Power Input | 24V/DC battery provided by supplier | |
Power output | 1.1KW | |
Power Input | 220V/50HZ/25A (or customized for local power supply) | |
Drive system | Hydraulic | |
Control Mode | Inching Switch / Automatic (PCB relay circuit) | |
Drive control | Self-resetting system | |
Overload Protection | Over current relay | |
Material Platform | Checkered slip-proof aluminum alloy | |
Painting | Plastic electrostatic spraying | |
Guard panel & drive cabinet | Aluminum Alloy / 304 stainless steel (framework) | |
Operation Panel | Polished aluminum Alloy | |
Auto-flap Working Range | 75° | |
Working condition | Both indoors and outdoors | |
Working temperature | From -10°~60°C | |
Installation | Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground) | |
Control Device | Calling box (installed on the wall nearby) and remote controller(Extra optional) | |
Emergency stop | The lifting and lowering process can be stopped immediately by pressing the emergency button. | |
Safety Device | Safety interlock | Lock the platform when it is out of control Interlock |
Safety net | The operation must be stopped immediately the safety net senses obstacle during operation. | |
Emergency Lowering | The platform can be lowered by opening hydraulic valve manually or rolling screw rod. | |
Auto-flap | Turn up automatically to protect passenger from falling. | |
Safety door | Manual door on lower/higher entrance (extra optional) |