Model NO.
CD01-4T2
Certification
CE, FCC, RoHS
Working Principle
Ultrosonic Wave
Operating Temperature Range
-20°C~+80°C
Technich Type
Ultrosonic
Installation Method
Open-hole Type
Brand
June
Product Name
Meter Free Change LED Display Car Parking Sensor
Function
Front and Rear Parking Sensor in One
Sensor Diameter
18.5mm
Installation
Round Ring Adhisive
Beep Alarm
Support with Built-in Buzzer
Sensor Cable
2.5m with IP67 Waterproof Connector
Display Cable
5 Meter
Towbar and Spare Tire
Support with 25cm Offset by DIP Switch
Side Sensor Detection
Limited to 80cm by DIP Switch to Avoid False Alarm
Front Bumper
Supported
Transport Package
Netural Package
Specification
530mm*230mm*290mm
Origin
Shenzhen, Guangdong
HS Code
8512301900
Production Capacity
3000 Pieces/Month
After-sales Service:
1 Year
Warranty:
1 Year
Kind:
Obstacle Detection Radar
Test Distance:
2.5-0.3m
Warning Type:
LED Display
Probe Number:
4
Most Poplular Inch and Meter Free Change LED Display Car Parking Sensor System
Function
1.Front sensor system
2.Rear sensor system
3.Speed mode and brake mode front activation
4.Side sensor limitation to 80cm
5.25cm offset for towbar and spare tire
Features:
1) Sensor sensitivity is adjustable. You can adjust sensor sensitivity by yourself if it's too strong or too weak. We also
reserve a standalone turn on/off parking sensor switch plug for customers who want to add a switch to turn off the
whole parking sensor kit.
Function details
1. There are brake activiation and speed activation availble. CONFIG1 chooses front system or rear system.
CONFIG 2 chooses speed activation and brake activation for front system.
2. Front activation choose by dip switch 2. UP for Speed activation, Down for Brake activation.
3. Side sensors detection limitation to avoid strong side sensor false alarm are designed. UP for
without limitation. Down for limitation to 80cm.
4.However, some clients says the buzzer sound is much lower. So design the buzzer sound chioce to adjust the louder buzzer sound. It can be done from 800Hz to louder 2400 Hz. CONFIG4 up is for louder 2400Hz and down is for lower 800Hz for choice for custmer themselves.
5. IP67 Waterproof connector for each sensor cable. Easy for sensor replacement.
6. Control box with thick pin socket for sensor and power. Plull force is up to 15KG. System will not pull off easily. Free software update at customers side. Sensitivity can be adjusted freely.
7. Install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle for side sensors.
8. DSP01 LED display can be installed upside down on the windshied or at the back of the car, or on dashboard. It can read the distance from Meter to Feet free by yourself. Built-in buzzer can be turned off.
Package
Neutral Package: White box
QTY: 12.0 SETS .
N.W.:7.5 KGS .
G.W.: 8.5 KGS .
Volume:0.036m³
Shipping:DHL, UPS, FedEx, EMS Express available; Air and Sea shipment available.
Function
1.Front sensor system
2.Rear sensor system
3.Speed mode and brake mode front activation
4.Side sensor limitation to 80cm
5.25cm offset for towbar and spare tire
Features:
| Model number | CD01-4T2. |
| Sensor diameter | 18.5mm |
| Sensor cable | 2.5m with IP67 waterproof connector. |
| Sensor detection | 0-2.5m. |
| Display range | 0-2.5m for rear system, 0-1.2m for front. |
| Built-in buzzer range | 30cm-1.5m for rear system, 30cm-80cm for front. |
| Distance readout | Meter and Feet free change |
| Warranty | 1 year |
1) Sensor sensitivity is adjustable. You can adjust sensor sensitivity by yourself if it's too strong or too weak. We alsoreserve a standalone turn on/off parking sensor switch plug for customers who want to add a switch to turn off the
whole parking sensor kit.
Function details1. There are brake activiation and speed activation availble. CONFIG1 chooses front system or rear system.
CONFIG 2 chooses speed activation and brake activation for front system.
2. Front activation choose by dip switch 2. UP for Speed activation, Down for Brake activation.
3. Side sensors detection limitation to avoid strong side sensor false alarm are designed. UP for
without limitation. Down for limitation to 80cm.
4.However, some clients says the buzzer sound is much lower. So design the buzzer sound chioce to adjust the louder buzzer sound. It can be done from 800Hz to louder 2400 Hz. CONFIG4 up is for louder 2400Hz and down is for lower 800Hz for choice for custmer themselves.
5. IP67 Waterproof connector for each sensor cable. Easy for sensor replacement. 6. Control box with thick pin socket for sensor and power. Plull force is up to 15KG. System will not pull off easily. Free software update at customers side. Sensitivity can be adjusted freely.
7. Install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle for side sensors.
8. DSP01 LED display can be installed upside down on the windshied or at the back of the car, or on dashboard. It can read the distance from Meter to Feet free by yourself. Built-in buzzer can be turned off.
Package
Neutral Package: White box
QTY: 12.0 SETS .
N.W.:7.5 KGS .
G.W.: 8.5 KGS .
Volume:0.036m³
Shipping:DHL, UPS, FedEx, EMS Express available; Air and Sea shipment available.
Send Message
