Model NO.
C-210
Definition
420TVL
Chip
CMOS
Waterproof Grade
IP68
Mimimum Illumination
0.1lux
Working Temperature
-30ºC-80ºCrh95% Max
Working Humidity
0%-90%
Power Supply
DC12V
Current Consumption
150mA
Optional
LED or Infared Lamp
Accessories
Shell ;Screws;Wire; Package Box
Transport Package
Neutral Box
Trademark
Wemaer
Origin
China
HS Code
8525801390
Production Capacity
5000sets/Day
Warranty:
12 Months
Applicable Model:
Car, SUV, Truck, Agricultural Vehicles, Sightseeing Car, RV, Forklift, Harvester, Corn Machine
Shell Material:
ABS Plastic
Display Type:
Reverse Image
Interface:
RCA
Function:
Night Vision, Waterproof, Dustproof, Shockproof
Night Vision Rearview Reverse Mini Car Camera
1.Product Features:
1) Original fitting by replacing the shelf of license light or Universal installation
2) Smart size for hidden installation.
3) 1/3"CCD
4) Lens: 170 degrees
5) Waterproof and dust-proof (IP68) CCD camera
6) With car reversing reference line(optional)CCD camera.
7) License light available on partial models.
8) Night vision available and high definition CCD camera.
9) Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.complete set of equipment
1) Two Screws and a shell
2) 6m video wire and 1.2m power wire
3) A User Manual ×1
4) A package box ×1
2.Technical Parameters
| Image Sensor | 1/3color digital sensor |
| Image Format | NTSC 50HZ/PAL 50HZ |
| Effective Pixel | 656*492 |
| Waterproof Index | IP67 |
| Viewing Angle | 170degrees |
| Mimimum Illumination | 0.1Lux |
| Storage temperature | -40ºC-85ºC RH95% MAX |
| Working Temperature | -30ºC-80ºCRH95% MAX |
| Working Humidity | 0%-90% |
| Resolution | 420 TV Lines |
| Power supply | DC12V+10% |
| Current consumption | No more 150mA |
| S/N radio | More than 48dB |
| Sync system | Internal |
| Warranty | 12 months |
| Scanning system | 2:1 interlace |
| Horizontal sync frequency | 15625KHZ |
| AGC | AUTO |
| BLC | AUTO |
| Video output | 1.0Vp-p, 75Ω |
3.Installation Guides:
1) Get out the license light;
2) Get the rear view lens lines across the license light original position;
3) Fasten the camera with the buckle which place in the two sides of the camera;
4) Connect the lens built-in license light power lines to the original license light power lines;
5) Connect the reverse lens switching lines;
6) Connect the camera's signal line to the signal extension line;
7) Connect the car's reverse light line to camera's video cable;
8) Check if all lines are correct connected and arranged;
9) Debug the working effects of the camera and the license light;
10) Cover the car trunk. Finishe
Installation:
A: Display screen
B: Camera
C: Video extention wire
Introduction to company advantages
Send Message
