Model NO.
oria-c005
Type
with Machine Room
Speed
1.00 - 2.00m/s
Capacity
500-1000kg
Persons
11 - 19
Shape
Semi-circular
Number of Sides
Four
Driving Type
AC Elevator
Control Mode
Group Control
Elevator Door
Sider Door
Door Knife
Double
Car Door
Hairline Stainless Steel
Export Markets
Globe
Fllor
PVC
Trademark
ORIA
Specification
CE, GMP
Origin
Huzhou Zhejiang
HS Code
8428101090
ORIA elevator company is specialized in the manufacture and export of elevator and the elevator parts. Original, rapid, international, and Asian are the meaning of our company. We have high technology and create classical and extraordinary quality.
Standard Function of ORIA Sightseeing Elevator
VVVF Drive | Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort. |
| VVVF Door Operator | Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop. |
| Independent Running | The lift can not respond to outer calling, but only respond to the command inside the car through the action switch. |
| Automatic Pass Without Stop | When the car is crowded with passengers or the load is close to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency. |
| Automatically Adjust Door Opening Time | Door-open time can be automatically adjusted according to the difference between landing calling or car calling. |
| Re-open with Hall Call | In the door shutting process, press reopen with hall call button can restart the door. |
| Express Door Closing | When the lift stops and opens the door, press door-shut button, the door will be closed immediately. |
| Car Stops and Door Open | The lift decelerates and levels, the door only opens after the lift comes to a complete stop. |
| Command Register Cancel | If you press the wrong floor command button in the car, twice continous pressing of same button can cancel the registered command. |
| Direct Parking | It compeletely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency. |
| Lighting Screen Protection | In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects. |
| Designated Stop | If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor. |
| Overload Holding Stop | When the car is overload, the buzzer rings and stops the lift in the same floor. |
| Anti-stall Time Protection | The lift stops operation due to slippery taction wire rope. |
| Start Protection Control | If the lift does not leave door zone within the designated time after it gets started, it will stop the operation. |
| Inspection Operation | When the lift enters into inspection operation, the car travels at inching running. |
| Fault Self-diagnosis | The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation. |
| Repeated Door Closing | If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated. |
| Up/down Over-run and Final Limit Protection | The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of the control. It results in the more safe and reliable lift travel. |
| Down Over-speed Protection | When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety. |
| Upward Over-speed Protection Device | When the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift. |
| Micro-touch Button for Car Call and Hall Call | Novel micro-touch button is used for operational panel command button in the car and landing calling button. |
| Floor and Direction Indicator Inside Car | The cars shows the lift floor location and current travel direction. |
| Floor and Direction Indicator Hall | The landing shows the lift floor location and current travel direction. |
| Emergency Car Lighting | Emergency car lighting automatically activated once power failure. |
| Inching Running | When the lift enters into emergency electric operation, the car travels at low speed inching running. |
| Five Way Intercom | Communication amid car, car top, lift machine room and rescue duty room through walkie-talkie. |
| Bell | In emergency conditions, if bell button above car operation is continuously pressed, eletric bell rings on the top of the car. |
| Fire Return | If you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift directly and immediately drives to the designated rescue landing and automatically opens the door. |
| Car Light Automatic Shut-off | If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy. |
| Locking Return | The lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service. |
