Model NO.
Customized
Entry Type
1-Way
Style
Double Faced
Insulation
Insulation
Transport Package
Use Packing Belt to Pack 50pieces Per Unit
Specification
Customized
Trademark
Hongtian
Origin
Suzhou, China
HS Code
3921909090
Production Capacity
5000 Pieces/Day
After-sales Service:
Online Technical Support
Warranty:
1 Year
Type:
Flat Pallets
Material:
Composite Materials
Size:
Polypropylne Plastic
Load Capacity:
1T
Advantages of GMT pallets
GMT(Glass Mat reinforced Thermoplastics), or glass fiber mat reinforced thermoplastic composite material, which is made of fiber as reinforcing material and thermoplastic resin as base material made by method of heating and pressurizing. It becomes widely used composite material in the world and is considered as one of the most prospective development new material in the 21st century.
1.Light weight
Taking one pallet size 850*680 for example, with same thickness, our GMT pallet is lighter; for same weight, our GMT pallet is thinner. GMT pallet is lightest with high strength.
2.High Impact Resistant
Impact strength of PVC plate is less than or equal to 15KJ/m2, GMT pallet is greater than or equal to 30KJ/m2, comparing the impact strength under the same conditions.
Drop hammer experiment in the same height shows that: when GMT pallet slightly cracked, PVC plate has been breakdown by drop hammer. ( Below is the laboratory drop tester: )
3.Good Rigidity
GMT plate elastic modulus 2.0-4.0GPa, PVC sheets elastic modulus 2.0-2.9GPa. The following diagram: GMT plate bending effect compared with the PVC plate under the same stress conditions
4.Not Easily Deformed
5.Waterproof
Water absorption rate <1%
6.Wear-resisting
Surface hardness shore: 76D. 100 minutes vibration with materials and pressure. Brick machine screw off, pallet is not destructed, surface wear is about 0.5mm.
7.Anti-high And Low Temperature
Being used at min 20 degrees, GMT pallet won't deform or crack.
GMT pallet is able to withstand high temperature of 60-90ºC, won't easily deform, and suitable for steam curing, but PVC plate is easy to deform at high temperature of 60 degree
8.Long Service Life
Theoretically, it can be used more than 8 years
Shanghai Office: No.1188,Lianhang Road,Minhang District, Shanghai, China
GMT(Glass Mat reinforced Thermoplastics), or glass fiber mat reinforced thermoplastic composite material, which is made of fiber as reinforcing material and thermoplastic resin as base material made by method of heating and pressurizing. It becomes widely used composite material in the world and is considered as one of the most prospective development new material in the 21st century.
1.Light weight
Taking one pallet size 850*680 for example, with same thickness, our GMT pallet is lighter; for same weight, our GMT pallet is thinner. GMT pallet is lightest with high strength.
2.High Impact Resistant
Impact strength of PVC plate is less than or equal to 15KJ/m2, GMT pallet is greater than or equal to 30KJ/m2, comparing the impact strength under the same conditions.
Drop hammer experiment in the same height shows that: when GMT pallet slightly cracked, PVC plate has been breakdown by drop hammer. ( Below is the laboratory drop tester: )
3.Good Rigidity
GMT plate elastic modulus 2.0-4.0GPa, PVC sheets elastic modulus 2.0-2.9GPa. The following diagram: GMT plate bending effect compared with the PVC plate under the same stress conditions
4.Not Easily Deformed
5.Waterproof
Water absorption rate <1%
6.Wear-resisting
Surface hardness shore: 76D. 100 minutes vibration with materials and pressure. Brick machine screw off, pallet is not destructed, surface wear is about 0.5mm.
7.Anti-high And Low Temperature
Being used at min 20 degrees, GMT pallet won't deform or crack.
GMT pallet is able to withstand high temperature of 60-90ºC, won't easily deform, and suitable for steam curing, but PVC plate is easy to deform at high temperature of 60 degree
8.Long Service Life
Theoretically, it can be used more than 8 years
Sandy Yang
Sales Manager
Suzhou Hongtian Plastic Co., Ltd.
Factory Add:No.5 Hongjing Road, Xinzhuang Industrial Park, Changshu, Jiangsu,ChinaShanghai Office: No.1188,Lianhang Road,Minhang District, Shanghai, China
Send Message
