Model NO.
blade
Material
Steel
Blades
5
Certification
ISO9001:2000
Trademark
zhenjiang star
Transport Package
Depends on Requirement of Customer
Origin
Zhenjiang
We have rich experience hydraulic engineering team to design propeller for customer if be wanted. we also are good at doing urgent propeller reparing job.
The main targets when designing an FP propeller are:
-Efficiency (related to speed)
-Cavitation behaviour (related to noise)
-Pressure pulses on the hull(related to vibrations)
-Meeting the strength requirements.
1 Material: stainless steel
2 Diameter:less than 5500mm
3 Weight: below 30T
4 Function: ship
5 Certificate:ISO standard
6 Payment terms: T/T L/C AT SIGHT
7 Delivery time: 20-30 days
8 Package: standard wooden box
9 Our propeller mainly exported to France,Holand,Japan,Korea and so on.
10 Standardization workship,specialization intellectualized equipment ensure our high quality throughput and help us realize new span ongoing way.
This information is critical to determining the correct propeller for your application:
1.3 Blades
A 3-blade propeller usually offer s top speed performance.
2. Diameter:
Diameter is the distance across a circle encompassing all of the propeller blades.
3. Pitch:
Pitch is the theoretical distance a propeller will move through the water of each revolution.
4. Right hand or left hand Rotation
In most cases, right hand propellers are used for single engine application and one left hand propellers are used for twin engine applications to achieve better steering control.
5. Cupped Blades:
This is a technique used to enhance the performance of propellers under certain conditions. A cupped propeller will exhibit very high efficiency at high speeds as well as minimize cavitation under heavy loads.
6. Rake:
Rake is special design feature. Positive rake benefits from normal bow lift to permit the use of a larger diameter propeller, while negative rake can provide extra blade strength for use in very high speed applications.
| Diameter | Pitch | Blades | ||
| inches | mm | inches | mm | |
| 7 1/4 | 184.15 | 5 | 127.00 | 3 |
| 7 1/4 | 184.15 | 6 | 152.40 | 3 |
| 7 1/2 | 190.50 | 7 | 177.80 | 3 |
| 7 1/2 | 190.50 | 8 | 203.20 | 3 |
| 9 1/4 | 234.95 | 8 | 203.20 | 3 |
| 9 1/4 | 234.95 | 9 | 228.60 | 3 |
| 9 1/4 | 234.95 | 10 | 254.00 | 3 |
| 9 1/4 | 234.95 | 11 | 279.40 | 3 |
| 9 7/8 | 250.83 | 10 1/2 | 266.70 | 3 |
| 9 7/8 | 250.83 | 12 | 304.80 | 3 |
| 9 7/8 | 250.83 | 13 | 330.20 | 3 |
| 11 1/8 | 282.58 | 13 | 330.20 | 3 |
| 11 5/8 | 295.28 | 11 | 279.40 | 3 |
| 11 3/8 | 288.93 | 12 | 304.80 | 3 |
| 13 1/2 | 342.90 | 15 | 381.00 | 3 |
| 13 1/4 | 336.55 | 17 | 431.80 | 3 |
| 13 | 330.20 | 19 | 482.60 | 3 |
| 13 3/4 | 349.25 | 15 | 381.00 | 3 |
| 13 | 330.20 | 17 | 431.80 | 3 |
| 13 3/4 | 349.25 | 17 | 431.80 | 3 |
| 13 3/4 | 349.25 | 19 | 482.60 | 3 |
| 14 1/2 | 368.30 | 19 | 482.60 | |
Design /repairing service:
We have rich experience hydraulic engineering team to design propeller for customer if be wanted. we also are good at doing urgent propeller reparing job.
The main targets when designing an FP propeller are:
-Efficiency (related to speed)
-Cavitation behaviour (related to noise)
-Pressure pulses on the hull(related to vibrations)
-Meeting the strength requirements.
