Model NO.
pneumatic marine rubber fenders
Body Material
Natrual Rubber More Than 57%
Working Ages
12 ~ 15 Years
Warranty
15 Months .
Certificates
ISO17357, CCS, Dnv, Gl, Lr, BV
Fender Style
Yokohama-Type, Net-Type, Sling-Type, Design Variat
Transport Package
Deflated and Loaded Into Container
Specification
CCS, ABS, LR, ISO17357: 2002
Trademark
Evergreen Maritime
Origin
Qingdao, China
HS Code
40169500
Production Capacity
200PCS/Month
Material:
Rubber
Fender Type:
Yokohama Rubber Fender
Inner Pressure:
P50, P80
Diameter:
0.5m - 4.7m
Length:
1m - 12m
Features:
Stainless Steel Both End Flanges
Yokohama Pneumatic Rubber Inflatable Marine Fender for Ship to Ship, Ship to Quay Transfer Combined with ISO 17357: 2014
1. Construction features
Yokohama pneumatic rubber fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
2. Yokohama pneumatic rubber fender type
3. Pressure requirements
Evergreen-Maritime manufactures yokohama pneumatic rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2002.
1. Construction features
Yokohama pneumatic rubber fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
2. Yokohama pneumatic rubber fender type
3. Pressure requirements
Evergreen-Maritime manufactures yokohama pneumatic rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2002.
Send Message
