Model NO.
FX-5 type Catenary pay-off cart
Specification
6500*2500*3000
Trademark
CHINLION
Origin
Xuzhou
HS Code
8000000
Production Capacity
10000
The car is mainly used for the erection of electrified railway contact lines and bearing cables, and there are two forms: single line and double line.
Product advantages
1. It is equipped with a hydraulic lifting and slewing work platform, and an automatic leveling device can be set when the outer rail height exceeds 125mm.
2. Equipped with two sets of tail line winch motors. The tail line winch motor can compensate for the tail line at the end of the pay-off and reduce the tail line waste.
3. It is equipped with an automatic tracking traversing mechanism of the pay-off reel, so that the angle of the pay-off reel out is small, and the wire damage is avoided.
4. Constant tension can be maintained during the unwinding process, and the tension detection is accurate without damage to the clue.
Performance parameters
Self-retracting speed: 0-1km/h
Self-unwinding speed: 0-6km/h
Tension error range: ≤10% (when starting and stopping) ≤5% (when running at a constant speed)
Bearing cable: 8kN-30kN (when putting a single line), (16kN-40kN) (when putting double wire)
Contact the wire: 8kN-30kN (when single line)
Product advantages
1. It is equipped with a hydraulic lifting and slewing work platform, and an automatic leveling device can be set when the outer rail height exceeds 125mm.
2. Equipped with two sets of tail line winch motors. The tail line winch motor can compensate for the tail line at the end of the pay-off and reduce the tail line waste.
3. It is equipped with an automatic tracking traversing mechanism of the pay-off reel, so that the angle of the pay-off reel out is small, and the wire damage is avoided.
4. Constant tension can be maintained during the unwinding process, and the tension detection is accurate without damage to the clue.
Performance parameters
Self-retracting speed: 0-1km/h
Self-unwinding speed: 0-6km/h
Tension error range: ≤10% (when starting and stopping) ≤5% (when running at a constant speed)
Bearing cable: 8kN-30kN (when putting a single line), (16kN-40kN) (when putting double wire)
Contact the wire: 8kN-30kN (when single line)
Send Message
