Model NO.
Tank Wagon
Gauge
1435/1520/1600mm
Tare Weight
20ton
Transport Package
Wooden Box
Specification
Railway Standard
Trademark
East Railway
Origin
China
Production Capacity
5000 Pieces/Year
Customized:
Customized
Certification:
ISO9001
Type:
Tank Wagon
Length:
12000
Width:
2840mm
Height:
3960mm
Overview
East Railway can provide different types of freight wagon including but not limited to the following parameters. You can select the corresponding parameters from the list below to match the basic performance parameters of the vehicle you require:
| Series | Axle loading/ton | Gauge range | Carbody material | Max speed Km/h | |||||||||||||||||
| 16 | 18 | 20 | 21.5 | 23 | 25 | 27.5 | 30 | 32.5 | 35 | 40 | 1000 | 1067 | 1435 | 1520 | 1600 | Carbon steel | Stainless steel | Aluminum | Mixed | ||
| Open top wagon | N/A | N/A | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | 120 |
| Flat wagon | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | N/A | Y | N/A | 160 |
| Covered wagon | Y | Y | Y | Y | Y | Y | Y | N/A | N/A | N/A | N/A | Y | Y | Y | Y | Y | Y | Y | Y | Y | 160 |
| Hopper wagon | Y | Y | Y | Y | Y | Y | Y | Y | Y | N/A | N/A | Y | Y | Y | Y | Y | Y | Y | N/A | Y | 120 |
| Tank wagon | Y | Y | Y | Y | Y | Y | Y | Y | N/A | N/A | N/A | Y | Y | Y | Y | Y | Y | Y | N/A | Y | 120 |
| Special wagon | N/A | N/A | N/A | N/A | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | Y | N/A | N/A | Y | 100 |
1.Tank Wagon
The tank car is a jar-shaped railway transport vehicle used to transport various liquids, liquefied gases, and powdered goods, including gasoline, crude oil, viscous oils, vegetable oils, liquid ammonia, alcohol, water, and various acids and alkalis, cement, lead oxide powder, etc.
The tank car play an important role in railway transportation, accounting for about 18 % of the total number of freight wagons.
Tank cars can be divided into two categories: railway transport tank and road transport tank.
Among them, railway transport tanks can be divided into light oil tank, viscous oil tank, acid and alkali tank, liquefied gas tank, and powder cargo tank.
The body of tank car is a horizontal barrel structure, and its barrel part is welded from the upper plate, bottom plate and end plate.
Tank Car Under frame
Because the tank body is a stiff structure, the weight of the liquid in the tank is mainly borne by the tank, and then passed through the bracket and pillow beam to the bogie. Therefore, the bottom of the tank mainly suffers from horizontal longitudinal traction impact. There is a side beam between the end beam and the pillow beam, which is mainly used to increase the stiffness of the end and to transfer part of the longitudinal force to the pillow beam. In addition, the bottom frame is also equipped with railings, walk through platforms, handrails, and pedals.
Tank Car Without Under Frame/Baseless Tank Wagon
Since the body of tank car is a complete cylindrical structure with greater strength and stiffness, the tank can not only withstand the weight of the liquid contained, but also bear the longitudinal force acting on the tank. So the tank wagon also could be designed without a base frame. There is no middle beam, side beam or beam between the two pillow beams. The tank is welded with the traction beam and the pillow beam. The connection device between the tank and the bottom frame is removed, and there is no need to clip it. This design could reduce the weight of the tank, and could use the tank body to bearing the load.
The tank body of tank wagon with underframe or not have difference end supporting part. The bottom tank wagon traction beam, bolster beam and tank body connected by welding are used for transmitting longitudinal forces.
2.Technical Description
| Main performance parameter | Basic dimension | ||||
| Parameter | Value | Mark | Parameter | Value | Mark |
| loading capacity | 48 t | * | length of wagon | 12000mm | * |
| tare weight | ≤20 t | ○ | Bogie base | 7870mm | ○ |
| axle load | 17 t | * | Max. high of wagon | 3960mm | * |
| total volume | 53m3 | * | Max. width of wagon | 2840mm | * |
| valid volume | 52m3 | ○ | () Hook center line height(empty car) | 990mm±15mm | * |
Min. pass radius/curve | 80m | * | |||
operate speed | 100km/h | * | |||
| clearance | From customer | * | |||
| Track gauge | 1000mm | * | |||
| Customer provide or confirm on Customer designate or Eastrail to decide General Determined by Eastrailway | |||||
| Key Part Configuration | Description | Standard | Mark | ||
| Bogie | Ride control | CHINA-TB/T | * | ||
| Draft gear system | 13 | CHINA-TB/T | ○ | ||
| Brake system | 120 | CHINA-TB/T | ○ | ||
3.Photos
4.About Us
- Established in 2019, Suzhou East Railway Company was created to both supply and design components, complete passenger carriages, freight wagons and spare parts for the ever growing world railway market.
- Our technical engineers, sales personnel and management team have many combined years of extensive experience in the Railway Industry with projects based all over the world.
- Our goals is to meet all of the Customers' requirements, bringing them the best products, Project management, Maintenance, System Design and Integration at the best price possible without any problems or delays.
- We offer a large inventory of products from the best Manufactures in China and other world leaders in railway product manufacture.
- Global shipping and project requirements with time sensitive deliveries and savings is our main aim.
- We look forward to help our clients grow and deliver in this industry all over the world.
6.Contact Us
Send Message
