Model NO.
1-2mm
Durability
3-5 %
Density
2.4-2.6g/cm3
Size Distribution
Oversize 5% Under Size 10%
Circularity
Round Rate 95%
Cao
>8%
Flammable Fire Test
Not Easy Combustion
MGO
>2.5%
Harmful Substances Content
Lower Than American 16CFR 1500 Standard
Na2o
<14%
Microhardness
650kg/Cm3
Wire Diameter
1-2mm
Sio2
>72%
Lead Content
No Lead Content
Transport Package
25kg/Bag, 40 Bags Put in 1 Ton (2200lbs) Bag
Specification
0.03-2mm
Trademark
Junda
Origin
China
HS Code
70182000
Production Capacity
3000tons/Month
Reflective Material Type:
Reflective Glass Beads
Material:
Galss Beads
Application:
Thermoplastic Paint, /Road Marking Paint
Color:
Transparent
Refractive Index:
ND1.5%
Hardness:
6-7 Mohs ;46HRC
Road Marking/Reflective Material Glass Beads From Manufacturer
Glass Beads Procedure
A.raw materials
All raw materials are qualified products with product testing reports.
B. molding
In the production process, molding is the key of product quality . On the furnace temperature control, the number of units and raw materials scattered uniformity, the introduction of wind and other equipment in strict accordance with the operating procedures.
C.annealing
annealing is the necessary way to improve the strength of the product, the temperature is critical. We strictly according to set temperature, the annealing speed can not be fast, nor slow, to ensure the timeliness of the annealing process.
D.test
We use advanced detection equipment, to control the step quality , substandard products can not be stored.
All the product reach international standard , like European EN1423 and 1424, the United States AASHTO M247, the British BS6088, Japan JIS R3301, South Korea KS L2521 and other requirements.
1.Glass Beads
Glass beads are usually flame flotation method, the flame float method is a secondary molding method, the basic principle of flame flotation method is to break the waste glass into a certain size of the particles, and in a certain way to the glass particles into the flame, In the role of the flame, the glass particles soften, melting,molding, annealing then become glass beads.
2.Glass Beads Specification
| Project | Quality | |
| Chemical composition% | SiO2 | >72% |
| CaO | >8% | |
| Na2O | <14% | |
| MgO | >2.5% | |
| Al2O3 | 0.5-2.0% | |
| Fe2O3 | 0.15% | |
| Others | 2.0% | |
| Refractive Index | Nd≥1.5% | |
| Density | 2.4-2.6g/cm3 | |
| Size distribution | Oversize ≤5% under size ≤10% | |
| Wire diameter | 0.03-0.4mm | |
| Durability | 3-5 % | |
| Hardness | 6-7 MOHS ;46HRC | |
| Microhardness | ≥650kg/cm3 | |
| Circularity | Round rate of ≥95% | |
| Appearance | colorless ,glass transparent without impurities,Round and smooth | |
| Application | 1.Grinding 2.Road marking paint 3.Sand blasting | |
| Lead Content | No lead content, reach American 16CFR 1303 Lead content standard | |
| Harmful substances content | Lower than American 16CFR 1500 standard | |
| Flammable fire test | Not easy combustion,reach American 16CFR 1500.44 standard | |
| Soluble heavy metal content | Metal content of soluble matter ratio solid weight rate no more than ASTM F963 corresponding value | |
| Package | 25KG/pp bag then 40 bags in one ton bag/pallet | |
4.Glass Beads with chinese standard size
| Type | Mesh | Micronsm Max(μm) | Microns Min(μm) |
| 30# | 20-40 | 850 | 425 |
| 40# | 30-40 | 600 | 425 |
| 60# | 40-60 | 425 | 300 |
| 80# | 60-100 | 300 | 150 |
| 100# | 70-140 | 212 | 106 |
| 120# | 100-140 | 150 | 106 |
| 150# | 100-200 | 150 | 75 |
| 180# | 140-200 | 106 | 75 |
| 220# | 140-270 | 106 | 53 |
| 280# | 200-325 | 75 | 45 |
| 320# | >325 | 45 | 25 |
5.Application
Glass Beads for Road Marking can improve visibility of the traffic markings and road signs and supply safer night driving conditions.
6.Glass Beads Normal Packing
1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
4. One ton loose in one ton bulk bag.
5. All pakages are lined with waterproof materials.
6. Gnerally, one 20GP container can load 25 tons, 27 tons at most.
We can also pakage according to costomers' requirements.
7.Company Profile
Jinan Junda Indutrial Technology Co,.Ltd. is located in Jinan , Shandong Province, China, which is the daughter cmpany of Honest Horse(CHINA) Holding Limited. We are the manufacturers of abrasives mediafor more than 15 years experience in north China.
Our products include bearinf steel grit, cast stel grit, steel shot, steel ct wire shot and garnet sand abrasives.
They are widely used in sandblasting, stone gang saw cutting, waterjet cutting, water filtration fields.
8.FAQ
Q1 What is the mode of your payment?
T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned
B/L from our E-mail.
L/C:100% irrevocable L/C at sight.
Q2 What's the MOQ of your product?
As usual MOQ is 1TON. Or as your require, we need to calculate the new price to you.
Q3 Can you provide the free samples?
Yes, we can send free samples less than 500g to you. Normally, we can send samples
to customer by express, such as DHL,TNT,Fedex,Aramex, etc.
Q4 Delivery time?
3-5 work days for one container after get the advance payment
Q5 Advantages?
15 years exprierence
SAE, ISO9001 certificate, SGS certificate
Support after-sale service
9.SSPC show
10.Our team
we are waiting for your contact about the details !
Send Message
