Model NO.
GN181
Usage
Farm Tractor
Certification
ISO
Drive Wheel
2WD
Emission Standard
Euro II
Fuel
Gas / Diesel
Condition
New
Matched Power
18HP
Tilling Width
900mm
Transport Package
Wooden Case
Specification
12-20hp
Trademark
MINGSIN
Origin
China
HS Code
87011000
Production Capacity
5000sets/Month
After-sales Service:
Third Party Support
Warranty:
12 Months
Type:
Walking Tractor
Goods Description:
GN 181 fitted with ZS1105N(18HP), water cooled, hand cracking starting diesel engine, chain transmission, double speed 600mm rotary tiller, 18 blades, tool box, gift, with rubber wheel & anti-skid iron wheel, packed with wooden case.
GN181/GN201 power tiller very suitable for use in paddy fields, dry fields, orchards, vegetable gardens and hilly land with a little inclination. It can be used for plough, rotary tilling, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached. In addition, it can also be extensively used as a stationary power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
Technical Specifications:
GN 181 fitted with ZS1105N(18HP), water cooled, hand cracking starting diesel engine, chain transmission, double speed 600mm rotary tiller, 18 blades, tool box, gift, with rubber wheel & anti-skid iron wheel, packed with wooden case.
GN181/GN201 power tiller very suitable for use in paddy fields, dry fields, orchards, vegetable gardens and hilly land with a little inclination. It can be used for plough, rotary tilling, harrowing in paddy fields, harvesting, drilling, ditching, transportation and etc. If suitable farm implements or accessories are attached. In addition, it can also be extensively used as a stationary power source for small scale drainage and irrigation, sprinkling, grain threshing, cotton ginning, flour milling, fodder cutting and so on.
Technical Specifications:
| Model of Power Tiller | Unit | GN-181 | |
| Structure weight | Without rotavator | kg | 380 |
| With rotavator | 550 | ||
| Working weight (with rotavator) | kg | 605 | |
| Turning speed of rototilling shaft | rpm | 324/406 | |
| Overall dimensions (L*W*H) | mm | 2950 x 980 x 1240 | |
| Number of blades | PCS | 24 | |
| Rototilling width | mm | 680 | |
| Type of tractor | Single axle, dual-purpose for both traction & drive | ||
| Travelling speed | Forward | Km/h | 2.18, 3.87, 6.5, 8.06, 14.31, 24.03 |
| Reverse | 1.72, 6.36 | ||
| Type size | 6.00-12 | ||
| Wheel track | mm | 810, 750, 690, 570(normally use 810) | |
| Min. ground clearance | mm | 210 | |
| Min. turning radius | m | 1.1(with no rotavator) | |
| Model of engine | ZS1110N | ||
| Type of engine | Horizontal 4-stroke | ||
| Bore x stroke | mm | 105*115 | |
| Total displacement | L | 0.9959 | |
| Compression ratio | 17:1 | ||
| Turing speed of crankshaft | rpm | 2200 | |
| 1-hour rated output | KW/hphp | 13.34/18.15 | |
| 12-hour rated output | KW/hp | 12.13/16.5 | |
| Specific fuel consumption | g/kw.h | ≤246.2 | |
| Specific lube oil consumption | g/kw.h | ≤2.00 | |
| Cooling mode | Condenser (Radiator) | ||
| Main farm implements (optional) | Anti-skid steel wheel Model 100-640 Double-furrow plough Model 1LS-220 Disk plough Model 1LS-220Y Power driven disk plough Model 1LYQ-320 Sprinkler Model 8Y-80 Swather/reaper Model 4GL-130 Trailer 7C-1 (Standard) Trailer 7C-1.5BH (Hydraulic dumping) | ||
Send Message
