Specifications:
1.Chinese (Model: WP6T180E200) diesel engine;
2.Electronically controlled multi-disc clutch;
3.Gearbox is 40F+40R, 24 forward gears+24 reverse gears+16 climbing gears;
4.Split-type and High-pressure Lifter with double cylinder;
5.Full hydraulic front-wheel steering with independent circuit;
6.Reliable hydrostatic\oi bath\disc brake\hydraulic power control;
7.Stable and Independent Power Output, with 6-spline 540/1000 r/min;
8.Planet-gear Final Transmission with small volume and large reduction ratio;
9.Rear three-point linkage, tire (front wheel+rear wheel) is 16.9-30+20.8-38
10.Cabin with air-conditioner and comfortable seat.
Model LT1804
Type
4x4
Diesel Engine
Diesel model
Chinese Diesel Engine WP6T180E200
Type
Vertical, water-cooled, 4-stroke, supercharged &intercooled
Engine power/speed
132.5KW & 2200r/min
Displacement
6.75L
Cylinder
6No.s
Min. Using mass
6500kg
Mass distribution(type with cab)
2600/3900kg ( front wheel /rear wheel )
Front counterweight
Max.1120kg
Rear counterweight
Max.1040kg
1).Rated traction force
37.8kN
2).Speed range(Forward/Reverse/Climbing)
43.33-2.75/43.33-2.75/2.52-0.34 km/h
3).Gear
40F+40R (24/24/16)
4). Front & Rear Wheel Specification
Front wheel spec.
16.9-30
Rear wheel spec.
20.8-38
Overall Dimensions
Min. Ground clearance
400mm (low-side from the ground)
Wheelbase
2880mm
Overall dimension (L*W*H)
5750*2320*3210mm
Note: L includes front counterweigh & rear suspension;
H with cabin.
Transmission System
1) Main Clutch:Electrically controlled multi-disc
2) Gear Box
Shifting number
40F+40R Composition
Gear type
Main transmission Synchronizer shift; Vice transmission Power shift
3) Rear Drive Axle
Central transmission(Front/Rear)
Spiral bevel gear/Spiral bevel gear
Differential mechanism(Front/Rear)
Close-style, 2 bevel planet gears
/Electronically controlled wet friction plate
Final transmission(Front/Rear)
Double Universal Joint Planetary Final Reduction/Single planet gear style
4) Steering
Steering Type
Hydraulic front wheel steering
Steering Device
Cycloid rotating valve
Linkage category
Rear three-point linkage III
Lifting force
31.8kN (610mm behind the hanging point)
Send Message
