Model NO.
Luzhong804
Type
Wheel Tractor
Usage
Farm Tractor
Certification
ISO, CCC
Drive Wheel
4WD
Emission Standard
China Stage II
Fuel
Gas / Diesel
Service Life
6-10 Years
Size
Medium
Color
as Requirement
Condition
New
Quantity in 40′hq
3PCS or 8PCS Packaged
Hydraulic Valve
One-Way or Two-Way Valve
Air Brake
Yes
Swing Draw Bar
Yes
A/C Cabin
Yes
Delivery Time
30 Working Days
Guarantee
12 Months
Clutch
Double Stage Clutch
Pto
Two Speed, 540/100rpm
Tyre
9.5-20/14.9-28 or 9.5-24/14.9-30
Trademark
Luzhong
Transport Package
Whole Assembled or Packaged by Steel Frame
Origin
Shandong, China
HS Code
87019310
1) Dual stage clutch;
2) Oil immersed disc brake;
3) Power steering;
4) Multi-valve hydraulic output;
5) PTO Rev. 540/1000 or 540/760rpm;
6) Wheel tread adjusted steplessly;
7)Shuttle gear;
| Model | Luzhong804 | ||
| Type | 4×4 Wheeled Type | ||
| Dimensions of Tractor (mm) | Length | 3800 | |
| Width | 1830 | ||
| Height | 2400 | ||
| Tread | Front Wheel | 1250 | |
| Rear Wheel | 1300(usual)-1500 | ||
| Wheel Base | 2010 | ||
| Min. Ground Base | 325(the bottom of steering horizontal pulling rod) | ||
| Min. Usage Mass (kg) | 2160 | ||
| Engine | Model | Quanchai4108 | |
| Type | Vertical, water cooled and 4-stroke | ||
| Rated Power(kw) | 58.8 | ||
| Rated Rev.(r/min) | 2300 | ||
| Fuel | Diesel Oil | ||
| Tire | Front Wheel | 9.5-20(8.3.-20,6.5-16,6.00-16, 7.00-12,6.00-12 Optional) | |
| Rear Wheel | 14.9-28(12.4-28,12.4-20,11.2-24,11.2-20,9.50-24 Optional) | ||
| Clutch | dry-friction, single disc and two stage | ||
| Steering | Hydraulic type | ||
| Transmission Box | two shafts, (4+4)×3 composed ((4+4)×2,(4+1)×2,(2+1)×4 Optional) | ||
| Suspension Type | Post Positioned Tri-point Suspension Catalogue I | ||
| PTO | Type and Rev.(r/min) | Post-position, half-independent, 540/1000 | |
| Spline Size | I35 Rectangle Spline with 6 teeth | ||
Company introduction:
1). established in 1996;
2). professional manufacture of tractor from 18hp to 180hp;
3). has it's own design and research engineering team;
4). has it's own machining center, especially for gearbox and rear axle;
5). Strict control system for quality.
Photos of workshop:
We have our own machining center, and assemble the gear box and rear axle by oursleves, so we could control the better quality.
Shipping photos:
