Off Road Service Trucks Customizing Rescue vehicle
Multifunctional Maintainging Truck WorkShop Truck Customizing
Road Repair Mobile Workshop
HOWO Mobile Workshop 4x4 Off Road Service Trucks
Truck Repair Shop Custom-made workshop and lubrication truck. Please send us your special requirements.
Different dimensions are possible. All trucks and workshop / lubrication containers are custom-made.
mobile-workshop-trucks Sub frame
The "Special Low-Torsion body mounting system" is recommendable due to their strongness, torsion-resistant design, in particular for "off-road" operation under rough cross-country conditions.
The elastic connections between the truck chassis and the sub-frame provide a torsion-absorbing function. This arrangement absorbs any stresses passing from chassis to body.
The sub-frame is mounted to the truck frame in a way to ensure equal load distribution. Substructure etc. hot-dip galvanized (can be painted on customers request).
Body mobile-workshop-container-truck-body
Heavy-duty execution made of corrugated steel panels, strongly welded together with inner coating.
The body structure an all other components are designed for ambient temperature of up to 55°C with extreme high humidity (100%).
The floorboard consists on the upper side of additional waterproofed plywood reinforcements and covered with aluminium chequered plate with integrated drainage pipes. On each side of the side-walls, two (2) sliding windows of reasonable size are installed.
Rear opening
Winged rear door, opening 270 degree, to be opened from in- and outside, robust security locking bar and padlock (container type). The door has one window, of reasonable size. Folding stairs, retractable, made of galvanised steel for easy access to generator and welding machine.
Side opening
Winged side door on right-hand side (or left-hand side) of the body with opening 180 degree, to be opened from in- and outside, robust security locking bar and padlock (container type). Door has one (1) window, of reasonable size.
Folding stairs, retractable, made of galvanised steel for easy access to body platform
Electrical installation 24 V. / 220 V. / 400 V.
24V-system is connected to electrical system of the vehicle
Two (2) ceiling lamps each 20W, with separate switches
One (1) outlet 24V inside shelter, mounted on side-wall
Additionally a separate diesel genset 220 V. / 400 V. with complete wiring inside workshop container
Paintwork and finishing
All steel parts are sand-blasted and prime-coated.
Body painted in one RAL colour.
Substructure etc. hot-dip galvanized (can be additionally painted on customers request)
Complete TOOLS and EQUIPMENT List of workshop container
Please see the below PDF
OPTIONS
for the workshop container
- Electrical welding machine
- Oxyacetylene welding
- Plasma MIG welding machine
- Genset with different power
- Centre lathe machine
- Air compressor
- Hydraulic, mechanical or electrical crane or hoist
- High pressure cleaner (cold and warm water, steam)
- Tools cabinets (steel sheet) above, fixed at the container walls (under the container roof, above work bench etc.)
- Workshop-container insulated and air-conditioned or / and heated
- Instead truck with double-cabin longer (or shorter) workshop-container
- Winged side door on right- (or left-) hand side of the body with opening 180 degree.
- Heavy duty hydraulic knuckle boom crane between truck cabin and workshop-container
- Workshop-container executed as a separate unit to be placed independent from the truck
- Special workshop-container for 4x4, 6x6 or 8x8 trucks for extreme off-road application in rough areas
The pictures are for your reference only.
Euro 3, Euro 4 military mobile workshop truck
4*2/4x4 | ND1160A41 | 4100 | WP6.180 |
| ND1163A48J | 4800 | WP10.270 WP10.290 |
Equipment for Mobile Workshop 5190YX | |||||
Item | Description | Technical Data | Measurement | Weight | Qty. |
1 | Chassis | As Option | |||
2 | Power Set (Generator) | Model: 40GF74-4 | 2030x650x1255(mm) | 1030kg | 1 |
Rated Power: 40KW | |||||
Rated Voltage: 400/230V | |||||
Rated Frequency: 50Hz | |||||
Rated Current: 72.2A | |||||
Output: 3-phase, 4-line | |||||
Diesel Engine: R4100ZD | |||||
Generator Model: TZH-40 | |||||
3 | Welding Set | Model: ZX5-250B | 406x530x840(mm) | 160kg | 1 |
Voltage: 380V | |||||
Phase: 3 | |||||
Frequency: 50/60Hz | |||||
Initial Current: 29.6A | |||||
Range: 25-250A | |||||
Input: 19.2KVA | |||||
Working Ambient: -10--+40oC | |||||
4 | Air Compressor | Model: AW3608 | 1180x410x850(mm) | 130kg | 1 |
Voltage: 380V | |||||
Frequency: 50Hz | |||||
Power: 3KW | |||||
Pressure: 0.7MPa | |||||
Capacity: 0.36M3/mm | |||||
5 | Drilling Machine | Model: ZQJ4119AD | 760x490x260(mm) | 57kg | 1 |
Bore Range: 3--16mm | |||||
Power: 700W | |||||
6 | Vice | Size: 150mm | |||
7 | Grinding Machine | Model: MQ3225 | 1 | ||
Size: 250mm | |||||
Power: 700W | |||||
8 | Oxygen Cylinder | Volume: 40L | 1 | ||
9 | Acetylene Cylinder | 1 | |||
10 | Gas Welding Set | 1 | |||
11 | Working Bench | Steel Panel | 2300x550x780(mm) | 1 | |
12 | Hand Tools | M6--16 drilling set; Hack Saw; | |||
Hammer; Portable Oil Pump; | |||||
3--16mm Thread Tapper; | |||||
Spanner sets; Socket Spanner Sets | |||||
Files; Clamps | |||||
Tools
No | Name | Specification | Quantity |
1 | Bow saw frame | 2 | |
2 | Hacksaw blade | 18 tine; 32 tine | Each 1 |
3 | Manual oil gun | 1 | |
4 | Oil pot | 300cc | 1 |
5 | Hand electric drill | 220V 0.6~6mm | 1 |
6 | Pipe expansion ware | 1 set | |
7 | Electrical maintenance kits | with multimeter | 1 set |
8 | Screw tap | Coarse thread | 6/set |
9 | Screw tap | Fine thread | 3/set |
10 | Screw tap holder | 180mm;280mm | each 1 set |
11 | Screw die | Coarse thread | 6/set |
12 | Screw die | Fine thread | 3/set |
13 | Drill | 1-10mm (at intervals of)0.5mm | 2set |
14 | Drill | 11-16mm | 2sets |
15 | Drill | 3.4;4.2;5.1;6.8;8.5;10.2 | each 1 set |
16 | Steel ruler | 150mm,300mm | Each 1 |
17 | Vernier caliper | 150mm,250mm | 1 |
18 | Screw thread gauge | the metric system; British system | each 1 |
19 | Tape | 2m | 1 |
20 | Round head hammer | 2.5 pound | 1 |
21 | File | roundness,semi-circle,flat,square ,triangle | Each 2 |
22 | Assorted set of files | 2 sets | |
23 | Screwdriver | cross 125mm;minus 125mm | each 1 |
24 | Pointed plier | 150mm | 1 |
25 | Steel wire clamp | 200mm | 1 |
26 | Carp clamp | 200mm | 1 |
27 | Oxygen watch | 1 | |
28 | Acetylene watch | 1set | |
29 | Welding wire clip | 500A | 1 |
30 | White glass | 10 | |
31 | Protection glasses | 1 | |
32 | Steel brush | 1 | |
33 | Emery cloth | 46#;80#;120# | each 10 |
34 | Metric fixed wrench | 10/set | 1 set |
35 | Metric ring wrench | 10/set | 1 set |
36 | Wrench | 8";10";12" | each 1 |
37 | Round head hammer | 1.5 pound | 1 |
38 | Welding torch | 1 | |
39 | Cut torch | 1 | |
40 | Oxygen tube | 30m | 1 |
41 | Acetylene tube | 30m | 1 |
42 | Hand electric drill | 220V 3-19mm | 1 |
43 | Jack | 10T | 1 |
44 | Socket wrench | 8mm-32mm | 32/set |
45 | Cut clamp | medium-sized | 1 |
46 | Welding gloves | 1 | |
47 | |||
48 | Work Light | 1 | |
49 | Welding mask | 1 |
MAIN TECHNICAL DATA | ||
Complete Vehicle | Model | ZZ2257N3857A |
Gross Weight | 25,000 Kg | |
Curb Weight | 11,880 Kg | |
Drive Type | 6x6 | |
Tyres | 10+1; 12.00R20 | |
Max. Speed | 76 KPH | |
Cabin | HOWO76 cab, single sleeper with air conditioner, all-steel forward control,55ºhydraulically tillable to the front, 2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers | |
Compartments Body | Corrugated container, rear compartment open, front compartment both sides open. Bottom 4 sides 1.5 cold rolled plate, middle layer polyurethane material insulation. Inside the aluminum alloy plate decoration | |
Front/rear Axle Loading | STR/ST16 | |
Overall Dimensions | 8868 x 2496 x 3180 mm | |
Cargo Van Size | 6000x2500x2080mm | |
Wheel Base | 3800+1400 mm | |
Engine | WD615.69 engine, 336HP | |
Gearbox | HW19710 | |
Back stairs, push and pull Windows on both sides | ||
Equipment | Power Set (Generator) | Model: 40GF74-4; Rated Power 40KW; Voltage 400/230V; Frequency 50 Hz; Rated Current 72.2A; 3-Phase 4-Line; Diesel Engine R4100ZD; Generator TZH-40 |
Welding Set | Model: ZX5-250B; Voltage 380V; Initial Current 29.6A; Range 25 ~ 250 A; Input 19.2 KVA | |
Air Compressor | Model: AW3608; Voltage 380V; Power 3KW; Pressure 0.7MPa; Capacity 0.36M3/mm | |
Drilling Machine | Model: ZQJ4119AD; Bore Range 3 ~ 16mm; Power 700W | |
Vice | Size: 150mm | |
Grinding Machine | Model: MQ3225; Size 250mm; Power 700W | |
Gas Welding & Cutting Set | Oxygen Cylinder 40L; Acetylene Cylinder 20L | |
Working Bench | Steel Panel, 2,300mm x 550mm x 780mm | |
Lifting Device | Roof Mounted, Retractable Cantilever, 2-Ton Chain Block | |
General tools | 2 sets | |
Working light | 15m | |
Equipments:
50Kw generator, air conoressor, charger, portable generator, are welding machine, plasma cutting machine, eletric winch, desk drill, desk grinding machine, 1 ton crane, 200kg hand chain hoist and slide rail, pneumatic tyre spanner
maintenance vehicle,Emergency repair car,road service car,maintenance truck
Hydraulic drive, reliable, safe and noise-free;
Latest fan-shaped nozzle, three overlapping design;
High power rear lights for night operation
option 2
Device | Model | Specifications | Dimensions |
Chassis | ZZ2152M4367LA ZZ2152M4367LA | ||
Pressure Washer | DL40-type | 22L/MINPressure:210kg Flow: 22L/MIN Motor:11kw Spray gun: 1 unit High-pressure hose:10 m nozzle: 5 unit 350kgWeight:350kg | Length:1500mm Width:650mm Height:500mm |
Oil drum with a suction pump | JK-3BGeneral | 40L/minPower:0.12kw Flow: 40L/min Head:2.5m Entrance and Exit: 25/32mm Voltage:220V | |
40KWdiesel generator set | 40GF-440GF-4 Engine Model: R4110D40-1 Generator Type:TZH-40 | Rated Power:40kw Rated Voltage:400/230V Rated Frequency:50HZ Rated current: 72.2A Output Mode:3-phase 4-wire Weight:850kg | 1820- x636x - 1320 |
ZX7SCRWelding Machine | ZX7-400SZX7-400S | Voltage:380V, 3 phase, 50/60HZ CurrentRange:25-250A Input Capacity: 14.5KVA Working environment:-10 ~ +40. C C | 475-x 280 -x 400 |
China Truck Truck Trailer Diesel Truck Tractor Truck Off Road Truck Lorry Truck Beiben Truck Mobile Steel Structure Workshop Mobile Led Truck Workshop Truck Truck Mobile Display Sinotruk Mobile Workshop Truck
Recommended Suppliers
China Truck Manufacturers Truck Trailer Manufacturers Diesel Truck Manufacturers Tractor Truck Manufacturers Off Road Truck Manufacturers Lorry Truck Manufacturers Beiben Truck Manufacturers Mobile Steel Structure Workshop Manufacturers Mobile Led Truck Manufacturers Workshop Truck Manufacturers Truck Mobile Display Manufacturers Sinotruk Mobile Workshop Truck Manufacturers
Hot Wholesale Products
Wholesale Lorry Truck Wholesale Service Truck Body Wholesale Workshop Truck Wholesale Mining Service Truck Wholesale Military Truck Parts Wholesale Mobile Workshop Bodie
Send Message
