Fuel
Diesel
Drive Wheel
4×2
Horsepower
＜150hp
Condition
New
Transport Package
Nude
Specification
6360× 2000× 2740mm
Trademark
ISUZU
Origin
China
HS Code
8503009090
Production Capacity
500PCS/Week
Type:
Tanker
Certification:
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Volume:
3001-5000L
Emission Standard:
Euroiii, IV, V,VI
Transmission Type:
Manual
Payload:
5t
ISUZU 600P 5 ton fire truck is adapted from Isuzu 600P series chassis of Qingling Motor Co., Ltd., the original double-row seat 4 door cab, the number of occupants is 2+3, the power is Isuzu 130 horsepower engine, the actual volume of the tank is 4 Cubic meters (5 tons), equipped with domestic well-known brands CB10/20 fire pumps, PS20 fire water cannons, with a range of more than 45 meters, is the first choice for combat fire fighting models in towns, communities, enterprises, factories, shopping malls.
Product Specifications:
Isuzu 5 tons water tank fire truck (600P)parameter configuration
| Chassis model | QL1070A5HWY | engine model | Isuzu 130hp/96KW |
| Outside dimensions | 6360×2000×2740mm | Wheelbase | 3360mm |
| Carrier volume | 1980~2500L | Emission Standards | Country Five (Country V) |
| Fire Pump | CB10/20 | Fire cannon | PS20W |
| Fire pump rated flow | 20L/s 1.0MPa | Environmental protection/exemption | There is environmental protection / declaration |
| Rated flow of fire monitor | 20L/s 1.0MPa | Fire gun range | Water ≥48m |
| Special function | Liquid tank | Carrier volume | 4 cubic meters (announcement 3.38 square meters) | |
| Material | Carbon steel ( stainless steel or PP material can be selected as required ) | |||
| Tank fixing | Flexible connection with chassis frame | |||
| Manhole | 1 DN460 manhole with quick lock/open device | |||
| Water inlet | There is a DN65 interface on the left and right sides of the water tank | |||
| Inlet and outlet | 1 water tank to the water inlet pipe of the pump, DN100 valve, manual control 1 water pump to the water tank filling pipe, DN65 valve, manual control | |||
| Drain | 1 DN40 water tank to put the remaining water port, with manual control of ball valve | |||
| Overflow | 1 DN65 overflow port | |||
| Fire Pump | model | CB10/30 type low-pressure vehicle fire pump | ||
| form | Atmospheric centrifugal | |||
| Installation location | Rear | |||
| flow | 30L/s @1.0MPa | |||
| Outlet pressure | 1.0MPa | |||
| Maximum suction depth | 7m | |||
| Water diversion device | Built-in sliding vane pump | |||
| Diversion time | Maximum suction depth≤35s | |||
| Fire cannon | model | PS30W | ||
| flow | 30L/s | |||
| Rotation angle | 360° horizontal rotation | |||
| Range | ≥55m | |||
| Maximum elevation/depression angle | Elevation angle ≥+60° | Depression angle≤-15° | ||
| Power take-off and transmission system | structure type | Sandwich mechanical transmission | ||
| Clutch method | Hand control | |||
| Lubrication method | Splash lubrication | |||
| Transmission system | Cross shaft universal joint drive shaft | |||
| Pipeline system | Pipe material | High-quality seamless steel pipe | ||
| Suction pipe | There is a DN100 suction port on the back side of the pump room | |||
| Water injection line | There is a DN65 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank | |||
| Outlet pipe | There is a DN80 water outlet on the left and right sides of the pump room, with a shut-off valve and a cover | |||
| Cooling water pipeline | Cooling water pipeline and control valve with cooling power take-off | |||
| Electrical Equipment | Fireplace lighting | 1 35W fire searchlight installed at the rear | ||
| Strobe light | Install red and blue strobe lights on both sides of the body | |||
| Warning device | Install a long row of red warning lights on the top of the cab | |||
| Siren | The control box is in front of the driver's cab | |||
| Auxiliary lighting | Firemen's room, pump room and equipment box are equipped with lights, and the control dashboard is equipped with bright and indicator lights | |||
| Additional electrical | Set up an independent circuit | |||
| Ladder and handle | Ladder | Aluminum alloy two-section flip ladder, when used, it should not exceed 450mm from the ground, | ||
| Get on the car | Adopt anti-skid round steel pipe with groove on the surface, sprayed on the surface | |||
| Equipment box and pump room | structure | The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate. | ||
| Equipment box | The equipment box is located at the rear of the passenger compartment. The aluminum alloy rolling doors on both sides are equipped with lighting lamps. The equipment room is equipped with storage boxes according to needs. | |||
| Pump room | The pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room | |||
Customer visit:
FAQ 3: How about the after sale service?
A: First we choose the popular brand in local market with after sale service. Second, we can delivery spare parts
and engineers to your place. Make maintenance plan and provide commissioning service.
FAQ 4: How about gurantee and warranty?
A: We provide 16 years spare parts service for exporting vehicles, warranty one year from B/L date.
Warranty of special model vehicle will be negotiated.
Send Message
