Model NO.
ZZ1257N4341W
Transmission Type
Manual
Payload
10t
Fuel
Diesel
Drive Wheel
6×4
Brand
Sinotruk
Models
Large
Usage
Compression Type
Condition
New
Body Volume
12m3
Transport Package
Nude
Trademark
SINOTRUK
Origin
Qingdao, China
HS Code
8705909990
Production Capacity
10000 Units/Year
After-sales Service:
Three Guarantees Policy of Sinotruk
Warranty:
Three Guarantees Policy of Sinotruk
Type:
Compactor
Certification:
ISO9000, CCC, CE
Volume:
＞15000L
Emission Standard:
Euro 2
Howo Garbage Compactor Truck 6x4
1.High compression ratio and large loading capacity: the loading capacity is equal to twice and a half of the uncompressed waste discharged in the same tonnage.
2.Operation Automation: With the computer control system, the driver is required to operate all the loading and unloading operations.
3.Two operation modes, automatic and semi-automatic, can be set up, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
3.Two operation modes, automatic and semi-automatic, can be set up, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
4.Good economy: When the special equipment works, the computer control system automatically controls the throttle.
Double insurance system: The operation system has dual functions of computer control and manual control, which greatly ensures and improves the utilization rate of vehicles.
5.Flipping mechanism: Flipping mechanism with garbage can (or bucket) can be optionally assembled.
| Model | Chassis model: ZZ1257N4341W | |
| Engine | WD615.69(336Hp at 2200r/min, Euro II)1350Nm at 1100-1600r/min | |
| Clutch | Single-plate dry diaphragm spring clutch, diameter 430 mm, hydraulically operating with air assistance | |
| Transmission | HW19710, 10 forward and 2 reverse, manual, With HW70 PTO | |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
| Front Axle | HF9 (9000Kg) | |
| Rear Axles | HC16 (2x16000Kg) Ratio: 4.8 | |
| Chassis | Enhanced version of multiple-leaf spring (Front 10 pieces, Rear 12 pieces) | |
| Fuel tank | With one 400L fuel tank with locking fuel cap | |
| Steering | model ZF8118 , hydraulic steering with power assistance Ratio: 22.2-26.2 | |
| Brakes | Service brake: dual circuit compressed air brake Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust brake | |
| Wheel & Tires | Rims width: 8.5 Tires : 12.00R20 | |
| Cab | HW76 cab, one sleeper, all steel forward control, 55°hydraulically tiltable to the front, 2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, exterior sun visor, stereo radio, safety belts, air horn, air conditioner, and single berths with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt, air conditioner, adjustable roof flap. | |
| Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 5.4KW Alternator: 3-phrase, 28V, 2240W; Batteries: 2×12, 165Ah Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp | |
| Cargo Body | 22m³,with filling gun, and flow meter, pressure discharge fuel, automatic fuel outlet, without flow meter; Exhaust pipe proposed, equipped with spark arrestor. | |
| Dimensions in mm | Wheel base Front wheel track Rear wheel track Front overhang Rear overhang Approach angle(o) Departure angle(o) Overall Dimension | 4300+1400 2022 1830 1500 2600 16 15 9795x2500x3250 (mm) |
| Weight in kg | Net weight Gross Vehicle Weight Front axle loading capacity Rear axle loading capacity | 15750 41000 9000 16000×2 |
| Performance | Maximum driving speed(km/h) Maximum grade ablility (%) Minimum ground clearance(mm) Minimum turning circle(m) | 85 35 290 15 |
| Optional | ABS Air conditioner Tires Bumper Truck color Intercooler Protector Fire Extinguisher | |
1: Payment:
A:30% advance payment after signed the contract, 70% balance should be paid before delivery. We can accept T/T and L/C
2. Delivery time:
A:25-45 working days after payment is received. According to different trucks models
3. How about your product quality?
A: The products have passed the ISO, CCC, SGS, BV, and CONTECNA qualification certification. All our spare parts are from the original manufacturers with original part number and and anti-fake label, the quality is 100% guaranteed.
4: How long is the warranty period?
A:The warranty of our products is 1 year or 50000km, which comes first
Send Message
