Model NO.
MFSFGED10
Payload
20T
Fuel
Diesel
Drive Mode
6x4
Maximum Horsepower
300-400hp
Condition
New
Transmission
Hw19710
Steering System
Zf8098
Front Axle
Hf9
Rear Axle
Hc16
Tyre
12.00-20 10+1spare
Agitator Rotaion
0-14r/Min
Drum Rotating
14°
Feeding Speed
3.5m3/Min
Transport Package
Nude
Specification
80CBM
Trademark
MAFAL
Origin
Jinan
HS Code
87054000
Production Capacity
200units
After-sales Service:
with Spare Parts Service
Warranty:
12 Months
Certification:
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Transmission Type:
Manual
Emission Standard:
State four
Displacement:
9
SINOTRUCK HOWO 6X4 10m3 self loading concrete mixer truck
Introduction
1. Concrete mixer truck opting left hand drive or right hand driven.
2. Optional for chassis: 4x2, 4x4,6x4, 6x6, 8x4, 8x8 models.
3. 3m3, 5m3, 6m3, 8m3, 9m3, 10m3, 12 m3 14m3 etc, many capacity are available to choose.
4. Provide different brand chassis: DONGFENG, SINOTRUK, SHACMAN, NORTH BENS, FOTON,
ROWOR, HINO, ISUZ-U, HUUNDAI, JMC.
Feature
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing
board on the front taper place; double blades and guiding blades of discharge are installed on the outlet
of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation
of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame
uses high intensity square tube with damping in the central area that can play role when vehicle is at full load
and under the bad conditions of road, which can lower the center of gravity of truck and make it move more
smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types
of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3,18 m3 etc.
Feature
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing
board on the front taper place; double blades and guiding blades of discharge are installed on the outlet
of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation
of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame
uses high intensity square tube with damping in the central area that can play role when vehicle is at full load
and under the bad conditions of road, which can lower the center of gravity of truck and make it move more
smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types
of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3 etc.
1. Concrete mixer truck opting left hand drive or right hand driven.
2. Optional for chassis: 4x2, 4x4,6x4, 6x6, 8x4, 8x8 models.
3. 3m3, 5m3, 6m3, 8m3, 9m3, 10m3, 12 m3 14m3 etc, many capacity are available to choose.
4. Provide different brand chassis: DONGFENG, SINOTRUK, SHACMAN, NORTH BENS, FOTON,
ROWOR, HINO, ISUZ-U, HUUNDAI, JMC.
Feature
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing
board on the front taper place; double blades and guiding blades of discharge are installed on the outlet
of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation
of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame
uses high intensity square tube with damping in the central area that can play role when vehicle is at full load
and under the bad conditions of road, which can lower the center of gravity of truck and make it move more
smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types
of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3,18 m3 etc.
Feature
1. The tank body uses double helical blades that makes its density moderate, with symmetrical mixing
board on the front taper place; double blades and guiding blades of discharge are installed on the outlet
of tank, which makes the discharge more evenly, faster in speed, and convenient for the pumping transportation
of other devices (such as automobile pump).
2. Low angle for mixing drum can extend the service life of hydraulic pump, motor and reducer. The sub frame
uses high intensity square tube with damping in the central area that can play role when vehicle is at full load
and under the bad conditions of road, which can lower the center of gravity of truck and make it move more
smoothly.
3. The upload production of this mixer adopts multiple advanced technology, which can produce various types
of mixer in volume such as 3m3, 5m3,6m3,8m3, 9m3,10m3, 12 m3 etc.
| 6*4 concrete mixer truck for sale | |
| Chassis Model | SACMT23 |
| Production Year | 2014, new truck. |
| Overall Truck Dimension | 9650*2500*3970 mm |
| Gross Weight | 25000KG |
| Rated Weight | 10820KG |
| Curb Weight | 14050KG |
| Engine | GH1A, Euro 4, 380HP |
| Displacement | 10837mL |
| Steering | ZF8098, power steering with hydraulic system. |
| Front Axle | HF9, 1x7000 KGS |
| Rear Axle | HC16, 2x18000 KGS |
| Tyres | 12.00R20, radial tyres with one spare tyre |
| Frame | 8+8 mm double strengthen frame |
| Fuel Tank Volume | 300L |
| Tank Body | 8 Cubic Meters |
| Hydraulic Pump | PMP (Italy Brand) |
| Hydraulic Motor | PMP (Italy Brand) |
| Speed Reducer | PMP (Italy Brand) |
| Type | Cement Mixer Truck |
| Material | Manganese steel |
| Rated load | 8m3 |
| Wheelbase(mm) | 3200+1350mm |
| Axle number | 6*4 Axle |
| Fuel Type | Diesel |
| Tire model | 1200R20-WJ |
| Axles brand | FUWA (BPW optional) etc. |
| Weight | 17500Kg |
| Function | Transport Ready mix |
| Front axle | HR9 |
| Rear axle | HC16 |
| Tire | 12.00-20 10+1spare |
1.. Which countries do we export to?
Asia: Philippine,Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: Sudan, Ethiopia, Libya, Ghana,Algeria,Nigeria,Guinea,Mozambique ,Kenya,etc
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,
like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,
ready to provide support services to users and dealers. Most problems can be solved
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
Asia: Philippine,Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: Sudan, Ethiopia, Libya, Ghana,Algeria,Nigeria,Guinea,Mozambique ,Kenya,etc
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,
like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,
ready to provide support services to users and dealers. Most problems can be solved
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
Send Message
