Sinotruk HOWO 6× 4 12cbm Heavy Duty Wheel Loader Construction Machinery Cement Concrete Pump Mixer Truck for Mixing Plant
* Large rise angle is designed at front cone to provide stronger mixing capacity and more uniform mixing, with a concrete slump change at all stages of ≤ 5%.
* Unique continuous trace design is used for transitional blade to ensure that mixing drum has no axial dead angle, with a lower residual rate of below 0.4%. * SCHWING's large-bend arc-shaped blade design is used at rear cone to provide better concrete fluidity, with charging and discharging speed increased by 10%. Tank technology of large capacity and low angle
* SCHWIN's blade design of variable height is used for mixing drum, together with optimized guide pipe, to provide stronger material sealing capacity and higher filling rate, thus improving the loading capacity of the tank by 6%.
* Low dip angle is designed, with the angle 5% lower than that of its counterparts and the stability improved by 18% under equivalent loading capacity. Comprehensive improvement of key part's reliability
* Feed hopper and chute are made of multilayer high-strength wear-resistant liner plate, with the service life increased by 50%.
* The combined design of two bent arc-shaped rear beams and triangle stayed beam structure is used for rear support to provide super-strong bearing capacity, with fatigue life increased by 30%, sturdy and durable.
| Typical truck model | ZZ5257GJBN3641W | ZZ5257GJBN3841W | ZZ5257GJBN4041W | ZZ5257GJBN4341W | |||
| Cab | Model | HW76 | |||||
| Type | HW76 extend cab, one berth, with A/C all steel forward control, 55°hydraulically tiltable to the front,2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt. | ||||||
| Engine | Model | WD615.87 | WD615.69 | WD615.47 | |||
| Rated power | 290HP(213Kw/rpm) | 336HP(247Kw/rpm) | 371HP(273Kw/rpm) | ||||
| Displacement | 4 stroke direct injection diesel engine | ||||||
| Type | 6 cylinder in-line with water cooling, turbo-charging & intercooling | ||||||
| Wheelbase | 3600+1400mm | 3800+1400mm | 4000+1400mm | 4300+1400mm | |||
| Mixer tanker size | 8CBM | 9CBM | 10CBM | 12CBM | |||
| Clutch | Single- plate dry diaphragm spring clutch, diameter 430(C) mm, hydraulically operating with air assistance | ||||||
| Transmission | SINOTRUK HW series 10/12/16 speed transmission, 10 forward and 2 reverse | ||||||
| Front axle | Steering axle with double T-cross section HF9 | ||||||
| Drive axle | Pressed axle housing, central single reduction HC16 Ratio:5.73 | ||||||
| Chassis | Frame: U-profile parallel ladder type with section of 320×90×8 mm, all cold riveted cross members and reinforced subframe Front suspension: 9 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension: 9+6 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer Spare wheel carrier: with one spare wheel Aluminum fuel tank: with 400 L fuel tank with locking fuel cap | ||||||
| Steering | Germany ZF, hydraulic steering with power assistance | ||||||
| Brakes | Service brake: dual circuit compressed air brake Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust brake Option: ABS | ||||||
| Wheel & Types | Rims: 8.0-20, 10 hole-steel Types 11.00-20 tube; Option: 12.00-20 tube, 12.00R20 tube | ||||||
| Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 5.4KW Alternator: 28V, 1540W; Batteries: 2×12, 165Ah Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp | ||||||
Concrete Mixer truck. At present, the mixer truck is an indispensable professional transportation tool for urban construction roads, bridges, houses, water conservancy projects, and mixing stations.
The small concrete mixer truck has the characteristics of narrow body, short wheelbase, small turning radius and other personalized designs, and has strong advantages in working environments with limited height, width and length.
The concrete mixing and transportation tank produced by our company can rely on the power of the dump truck to drive the gear oil pump and the hydraulic motor to drive the tank car to run.
The hydraulic components are controlled by the control lever, which can realize the normal and fast operation of the tank car, fast feeding, fast unloading and slow unloading. material. Thanks to the oil circuit cooler, the oil temperature is always kept below 55°C to ensure the stable operation of the hydraulic motor.
Price advantage:
We sell in factories without middlemen, so our price will be better than that of trading companies.
Quality advantage:
From the moment the customer places an order, we will be equipped with a professional team. Professional personnel are responsible for the design, production, tracking and transportation. We adopt the principle of responsibility system, and the quality can be guaranteed.
Professional advantages:
We have our own R & D team and design team. Our team has received professional training and good education, and is skilled in using CAD, SW and other drawing tools
Service advantages:
The staff will give the most favorable and accurate quotation to the customer within 2 hours according to the customer's requirements, make the most appropriate purchase scheme for the customer, and formulate the perfect solution according to the customer's after-sales demand within 10 hours.
1.What is the delivery date?
It usually takes 15 to 25 days of receiving the deposit.
2.Payment and mode of transportation?
We accept both T/T and D/P .
Bulk, rolling, loading, land transportation, I will actively provide customers with cheaper transportation.
3. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
- 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben, Volve...
- If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.
4.Can you satisfy my special requirement?
Definitely!We can make the trailers or trucks based on your requirement.
Send Message
