High Pressure Waster Flushing Truck, also called High Pressure Water Jetting Truck, also called Sewer Cleaning Truck, Water Jetting Truck, Sewer Flushing Truck, High Pressure Water Jetting Truck, High Pressure Cleaning Truck, High Pressure Water Truck, Sewer Cleaner Truck, High Pressure Water Jetting Truc.
High Pressure Water Jetting and Sewage Suction Truck is used for removing stones, bottles, cans, grease, sludge and other debris from sanitary sewer and storm drain lines by flushing action of high-pressure water. Water Jet Cleaners carry a high pressure pump, a water tank, high-pressure hoses and nozzles. The nozzles will get impulsion and make a move itself forward by jetting high-pressure water. It scrapes the accumulation out.
High-pressure water jetting is an efficient, economical, and environmentally safe way to clean drain and sewer pipes. Using high pressure pump and flexible hoses, ordinary water is propelled under varying amounts of pressure into the sewer line. Grease, sludge, sand and debris are the main causes of commercial drain line blockages. Our high-pressure water jetting and flushing truck can help you clear this sediment.
Common septic pumper truck vacuum pump brands include Chinese brands Yifeng and Weilong, other brands Battioni & Pagani vacuum pumps, Masport vacuum pumps, Moro vacuum pumps, Jurop vacuum pumps, etc.
For sewage tank volume, we can make it from 3000L to 20,000L
| Water Jetting and Sewage Suction Truck Specification | ||
| General | Model | CLW5250XWCZZ20 |
| Chassis Brand | SINOTRUK | |
| Wheelbase | 4300+1350 | |
| Overall Dimension | Appro. 10500*2600*3800 (mm) | |
| Max Axles Payload | Appro. 39000 (kg) | |
| Truck Tare Weight (kg) | Appro. 16000 (kg) | |
| Water Tank Capacity | Appro. 5000L | |
| Dirty Tank Capacity | Appro. 15000L | |
| Drive Type | 6x4, Left Hand Drive with power assisted steering | |
| Drive Speed | ≤110Km/h | |
| Cab | Type | One and a half row cab, forward control type, all welded steel cab of tilt type, rear mechanical cab suspension, adjustable driver seat |
| No of Seats | 2 persons and a sleeper bed, with safety belts | |
| Number of Doors | 2 | |
| Air Conditional | With air conditional | |
| Electric System | 24V | |
| Audio System | FM/AM radio, CD/USB player | |
| Engine | Brand | SINOTRUK |
| Model | WD615.47 | |
| Fuel Type | Diesel Fuel | |
| Emission Standard | Europe II | |
| Type | Water-cooled four-stroke, direct injection, turbocharged & intercooled, High pressure common rail fuel system, cold start. | |
| Nos of Cylinder | 6 | |
| Cylinders Arrangement | In-line | |
| Max Output Power | 273 (kw) | |
| Exhaust | 9726(ml) | |
| Max output power/rated speed | 371/2200 (hp/rpm ) | |
| Max torque/rotate speed | 1500/1100-1600 (N.m/rpm) | |
| Compression Ratio | 17:01 | |
| Bore x Stroke | 126*130mm | |
| Fuel System | Fuel Tank Capacity | 400Ltr |
| Material | Steel fuel tank | |
| Filler Cap | Lockable | |
| Fuel Gauge | Pointer dial type | |
| Fuel Filter | With water separator device | |
| Gear Box | Model | HW19710 |
| Type | Manual | |
| Forward Speeds | 10 | |
| Rear Speeds | 2 | |
| Max Input Torque | 1900N.m | |
| Forward Speeds Ratios | 14.284; 10.623; 7.871; 5.876; 4.375; 3.265; 2.428; 1.799; 1.343; 1 | |
| Reverse Speeds Ratios | 13.913; 3.18 | |
| Clutch | Type | Single-plate dry diaphragm spring clutch |
| Bridge | NOs of Axle | 3 |
| Front Alex | HF9 drum type | |
| Front axle load-bearing (kg) | 9000 | |
| Rear Alex | HC16 | |
| Rear axle load-bearing (kg) | 16000 * 2 | |
| Electric System | Voltage | 24V |
| Braking System | Full air brake system, split pneumatic circuit , parking spring brake acting on rear axles, exhaust brake | |
| Tire | Type | 12.00R20 |
| Nos | Total 11 pieces, including one spare tire | |
| Upper Body Specification | ||
| Tank | Water Tank Volume | 5000L |
| Dirty Tank Volume | 15000L | |
| Material | Carbon Steel (With anti-corrosion paint) | |
| Thickness | 8mm | |
| Color | According to your demands | |
| Vacuum Pump | Brand | MORO |
| Model | PM110W | |
| Suction Flow | 630 CFM | |
| Max Pressure | 29 PSI | |
| Rotation Speed | 1100 RPM | |
| Pump Weight | 645 lbs | |
| High Pressure Pump | Brand | PINFL |
| Model | PF36 | |
| Flow | 122 l/min | |
| Pressure | 160 bar | |
| Consumption | 37 kW | |
| Function Introduction |
| |
Phoebe
Sales Department
CHENGLI SPECIAL AUTOMOBILE CO.,LTD.
Add: Chengli Automobile Industry Park, Suizhou, Hubei, China
AFTER-SALE SERVICE
Warrant special vehicles and equipment we supplied are manufactured with mature technology, nice workshop, under strict quality control . They are free from defects in workmanship and material . With correct use and normal maintenance , you will enjoy a happy service on your vehicles or equipment as below :
★ Function Life
The vehicles are expected to be functioning 10 (ten) years with availability of spare parts.
★ Warranty
The customers can enjoy a maximum warranty period of 12 months or 10000 kilometers, whichever comes first, from shipment date on Bill of Lading.
During this period, if any failure, we will send replacement parts and components to customers by DHL, UPS, FEDEX free. Normal wear or fast consumables are excluded.
After this period, the parts can be provided at cost price.
This warranty does not cover damage due to improper use, accident or misuse or damage due to any unauthorized services.
If the goods are determined to be defective in materials or workmanship, we will, at ours option, repair or replace the goods.
★ Technical Support
For our supplied products, you can forever enjoy technical support whatever by phone call or email. We will respond aggressively to provide a prompt solution.
★ Onsite Training
On-site training could be executed if this term is included in the contracts agreed.
★ Onsite Service
We can assign our engineers to go to destination for on-site service if this term is included in the contracts agreed. Even service workshop could be built if the order comes to certain quantity.
Send Message
