Model NO.
CL5110TSL1
Fuel
Diesel
Payload
20T
Use
Carbon Steel
Cleaning Process
Cold Water Cleaning
Condition
New
Water Tank Capacity
2500L
Chassis Brand
FAW
Garbage Tank Capacity
6000L
Horsepower
170HP
Sweeping Width
3.2m
Maximum Cleaning Capacity
70000m2/H
Clean Efficienty
95%
The Maximum Diameter of The Suction Body
120mm
Product Name
FAW Rhd Sweeper Truck
Transport Package
Roro Ship
Specification
10000*3000*4000
Trademark
FAW
Origin
China
HS Code
8705909990
Production Capacity
5000 Units/Year
After-sales Service:
with After Sales Service
Warranty:
1 Year
Type:
Wet-type
Certification:
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Transmission Type:
Automatic
Emission Standard:
Euro 2
Factory Supply FAW RHD Sweeping Vehicle Street Sweeper Truck
| Truck Specification | ||
| Chassis model | CL5110TSL1 | |
| Cab | J5K right hand drive cabin | |
| Driving Type | 4*2 | |
| Max Speed (km/h) | 99 | |
| Maximum climbing angle | 30% | |
| Overall dimension(mm) | 7790*2470*3050 | |
| GVW( kg) | 16000 | |
| Mass in working order ( kg) | 9750 | |
| Wheelbase(mm) | 4170 | |
| F/R track base (mm) | 1800/1800 | |
| F/R overhang (mm) | 1430/2070 | |
| Approach/Departure Angel | 20/18 | |
| Tire | 10.00-20(6+1) | |
| Clutch | Single-plate dry diaphragm spring clutch | |
| Steering | Hydraulic steering with power assistance | |
| Gear box | CA6TB085M | |
| Bridge | Front axle | 8E,5T |
| Rear axle | 435,8T | |
| Engine | Model | CA6DF2D-17 |
| Fuel Type | Diesel fuel | |
| Type | Water-cooled four-stroke,, direct injection, turbocharged | |
| Exhaust(ml) | 6557 | |
| Max output power/rotate speed (hp /rpm ) | 170/2300 | |
| Max torque/rotate speed(N.m/rpm) | 620/1400 | |
| Braking system | Service Brake | Compressed air brake |
| Park Brake | Spring energy | |
| Auxiliary brake | engine exhaust brake | |
| Eletric system | 24v | |
| Upper-Body specification | ||
| Vice generator | ||
| Model | B140 | |
| Rated power (kw) | 103 | |
| Suction sweep operation | ||
| Cleaning efficiency | ≥95% | |
| The maximum diameter of the suction body(mm) | 120 | |
| Suction sweep width(mm) | 2.3-3.5 | |
| Maximum cleaning power (m2/h) | 70000 | |
| Butterfly dish brush overhang dimension(mm) | ≥400 | |
| Working speed (km/h) | 3-20 | |
| Water tank body | ||
| Rated capacity (m3) | 2.5 | |
| Garbage tank body | ||
| Rated capacity(m3) | 6 | |
| Discharge door opening angle | ≥45º | |
| Hydraulic system | ||
| Model | Open, electrical control | |
| The main element | Gear pumps, hydraulic motors, hydraulic cylinders, solenoid valve | |
| Pressure (mpa) | 16 | |
| Hydraulic oil tank capacity (l) | 60 | |
| Hydraulic oil temperature (ºC) | 60 | |
| Electrical system | ||
| Model | DC24V | |
| voltage | 24V | |
| Battery | 24V(2 set 12 v battery series connection ) | |
| Sprinkle system | ||
| The main elements | Electric diaphragm pump, water filters, nozzles, etc. | |
| Sweeper disk device | ||
| Model | Center four sweeper disk, controlled by a hydraulic motor, front right can be independently controlled with avoidance and reset function | |
| Diameter (mm) | 850 | |
| Angel | Forward 4-6º roll 4-7º | |
| Sucker device | ||
| Model | Single suction port, hydraulically controlled, spring suspension. | |
| Diameter (mm) | 200 | |
Send Message
