XCMG 5 Ton Xzj5100txsq5 Sprinkler-Sweeping Road Sweeper Truck for Sale
1 Beautiful and practical Carriage Design
Under the premise of meeting the requirements of the use and strength, it overall employs SUS304 single-layer stainless steel production with the advantage of simplicity and practicality and with good technology. Besides, trash integrates water tank so as to increase the volume of water, and bring mass production and processing. Trash can be set up within the anti-overflow alarm device and high pressure spray cleaning device. When it operates, the anti-overflow alarm device can prevent the sewage from the straw, which can avoid resulting in secondary pollution. Furthermore, after dumping garbage, the high pressure spray cleaning device can automatically clean the tank, greatly reducing the operators' labor intensity.
2 Cleaning Mechanism with Self-adaptive Control
Ground pressure of side washing system employs spring as adjustment mode which could adjust the ground pressure at any time according to the road conditions during work to reduce the washing wear. In order to reduce the washing wear, ground pressure of side washing system employs spring as adjustment mode which could adjust the ground pressure at any time according to the road conditions during work. In order to solve the problems on sweeper brushes' obtacles-free, one end of the supporting oil cylinder employs connected shackle to keep oil cylinder floating. When the sweeper brushes encounters obstacles, it has the function of automatic collision avoidance.
3 High Efficient Duct System
Duct system is the basis of pneumatic transmission of sweeper-washer vehicle and it includes suction nozzles, carriage channels and fans. The total three key parts decide the suction force, air loss, systematic power and etc. And they are the core parts in the design of sweeper-washer vehicle.
4 Reliable and effective waterway system
Equipped with stainless steel sprinkler and with a low-pressure fan-shaped surface of the nozzle, the scraper can suppress the dust from the brush. Nozzle is also installed with dust spray pipe and self-made large-diameter nozzle, which can suppress the dust that comes with picking up the garbage by the scraper.
High-pressure pumps are imported from Itay. When the high-pressure pump starts and the work valves switch, the pump can automatically unload. With the triple protection of the air cycle, safety valve and relief valve, high-pressure water pump can be effectively prevented from damage.
5 Power Take-off System
Assistant enging of sweeper-washer vehicle employs automatic clutch output protection device as its protective setting to ensure the unloading start and stop of assistant engine. It solve the problem that the power take-off impact is large and it has better performance in protection of engine, fan and high pressure water pump.
| Items | XZJ5100TXSQ5 | |
| Chassis parameters | Model | QL1100A8LAY(StateV) |
| Engine model | 4HK1-TC51 | |
| Engine Power | 141kW/2600r/min | |
| Wheelbase | 4175mm | |
| Assistant engine | Model | JE493ZG5 |
| Power | 64kW/3000r/min | |
| Vehicle parameters | Max. total weight | 10055kg |
| Dimensions(L x W x H) | 7130×2200×2720mm | |
| Curb weight | 7300 Kg | |
| Garbage parameters | Water tank volume | 6.2m³ |
| Effective Garbage volume | ≥3.5 m³ | |
| Max. Lifting angle | ≥45° | |
| Suction nozzle | Suction diameter | 180mm |
| Work ground clearance | 5~10mm | |
| Working Performance | washing width | ≥3.2m |
| Washing speed | 3~20 km/h | |
| Max. sweeping capacity | 64000/h | |
| Max. inhalation size | 120 mm | |
| Sweeping diameter | Φ900mm | |
| Driving performance | Max. climbing angle | 30% |
| Min. turning diameter | ≤16m | |
| Maximum speed | 110 km/h | |
| Dimensions | Front wheel | 1680mm |
| Rear wheel | 1650mm | |
| Approach angle | 17° | |
| Departure angle | 14° | |
| Min. ground clearance | 150mm | |
| Hydraulic system | Type | Open electrical control |
| Main components | Gear pump, oil motor, hydraulic cylinder, solenoid valve | |
| System pressure | 14MPa | |
| Hydraulic tank capacity | 60L | |
| Oil temperature | 60 ˚C | |
| Electric System | Type | DC24V,PLC programming control system |
| Voltage | Chassis: 24V | |
| Working device: 12V | ||
| Battery | Chassis: 12V-70A.H (2 in parallel) Work device: 12V-80A.H (1 only) | |
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted.
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC.
3: What about the delivery time?
A: 7-30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
Send Message
