The support arm and boom arm of the wrecker are all made of high-strength steel plate, which is formed by bending. Carbon dioxide automatic protection welding, only two welds are allowed, less welds, small deformation, high precision, high strength, and ultrasonic weld testing. Wrecker welding all adopts carbon dioxide shielded welding and argon arc welding, the length of the weld is greater than 300mm, and the automatic seam is adopted, which makes the weld surface smooth and beautiful.
Wrecker refers to a special vehicle equipped with road emergency operation equipment. Since the car is driving on the road, breakdowns and accidents are inevitable, especially on high-grade highways, this phenomenon often occurs. The task of the wrecker is to tow the faulty car or accident vehicle away from the scene in time to ensure that the road is unobstructed. Therefore, road wreckers are also called road rescue vehicles. With the increase of high-grade roads and cars in use, wreckers have also been developed.
Wrecker use: mainly used for road breakdown vehicles, urban illegal vehicles and emergency rescue.
1. Before driving the wrecker to reverse, you should carefully observe the reversing route and confirm that you can reverse after having the conditions for safe reversing. During the reversing process, drive slowly, pay attention to the situation on both sides and behind the wrecker, and pay attention to the space position on both sides of the front of the vehicle at any time, and be ready to stop at any time to avoid collision accidents due to excessive steering angles. Even if the road conditions behind are good, do not accelerate to reverse.
2. Reversing on general roads should avoid heavy traffic, non-motor vehicles and road sections with more traffic and narrow road surfaces. When reversing, if you find a passing vehicle, you should actively stop and avoid. Because when you need to reverse the U-turn, you should choose to do it in a lot that does not affect normal traffic.
3. If the wrecker needs to make a U-turn, it should choose a sign without a prohibition on U-turn, a wide section with a small traffic flow, it is strictly forbidden to make a U-turn in areas where U-turns are not allowed or dangerous road sections, and before the wrecker makes a U-turn, the traffic situation behind the wrecker should be observed first to confirm safety.
4. In the process of turning around the wrecker, the speed should be strictly controlled, carefully observe the situation at the front and rear of the road, confirm the safety before being able to move forward or reverse, and be ready to stop at any time. When you have to make a U-turn on a ramp, you should use the wrecker handbrake control every time you stop to avoid accidents caused by the wrecker slipping.
| Drive model | 4*2 |
| Maximum speed | 105km/h |
| Tare weight | 3800kg |
| Gross weight | 4495kg |
| Dimension | 5995mm*2300mm*2230mm |
| Front track width | 1475mm |
| Rear track width | 1615mm |
| Front suspenstion | 1015mm |
| Rear suspention | 1620mm |
| Approaching/Depature angle | 20/16° |
| Wheel base | 3360mm |
| Engine | 5042TQZB6 |
| Max power | 120HP |
| Max torque | 610N.m |
| Max torque speed | 1500rpm |
| Max power | 140hp |
| Output | 3.27ltr |
| Gear box | * |
| Gears | Manual-6 |
| Chassis brand | FOTON |
| Spring numbers | 3/3+2,8/6+5 |
| Front axle | 1575kg |
| Rear axle | 2920kg |
| Tires size | 7.00R16LT8PR |
| Q:Why choose us? A:We are the professional and reliable equipment supplier and trader which enjoys a sound name in the market. Q:How could we know the machine is good or bad? A:We provide the original OEM certificate which is granted by BureauVeritas,ISO,TuVRheinland,SGS,Intertek,TUV,UL,CQM,DEKRA,BSI and CCIC. Q:Where are you from? A:The office in downtown and the factory is outside of the town in Henan Province and the registered address is traceable online through "Chinese Market Supervision Platform" or "Ministry of Commerce of the People's Republic of China". Q:What it consists to the whole process of the trade? A:It's including the machine or the cargo itself and logistic service,we follow strictly to the rules and regulations of the "International Maritime Organization". Q:When would the customer receive the cargo? A:As a matter of fact,it's predictable of the vessel how long it takes to your destination port after completing the whole loading and before is difficult to do so,while we provide the GPS routine to ensure this data is open and safe for our clients. Q:Who guarantee the safety of the payment? A: Made-in-China and the supplier all approved by the commercial department screening and monitored all time by Internet Warning System. Q:Is there dispute solution if one party fails to obey the contract? A: Yes,we do,we have lawyer to give us advice how to solve the disputes in an acceptable and peaceful way in order to avoid any rising problems in future,making sure both parties interest not infringed. Q:Is there after-sale depot? A:Sales-depot is at your hand in major cities including Lagos,Nigeria;Dar es Salaam,Tanzania;Lubumbashi,DRC;Lusaka,Zambia;Harare,Zimbabwe;Gaborone,Botswana;Beira,Mozambique.The other sales-depot on the process to negotiate with the local agent and Chinese. |
Send Message
