Model NO.
PPY
Type
Auto Parking System
Working Mode
Unmanned
Driving
Dragging
Falling Prevention Device
Pull-Type
The Vehicle Inlet and Outlet
Down
Design
Customize
Certification
CE, ISO, CCC
Lift Mode
Chain
Voltage
380V
Max Vehicle Dimension (mm)
5300*1900*1550/2050
Weight (Kg)
2350
Elevating Speed (M/Min)
60
Travelling Speed (M/Min)
60-120
Elevating Motor
15kw
Travelling Motor
2.2kw
Sliding Motor
1.1kw
Driving Mode
Motor+Chain
Control Mode
PLC
Operation Mode
Touch Screen or IC Card
Trademark
Parktec
Origin
China
HS Code
8428902000
This system includes entrance and exit (car storage and retrieval operating position), fixed elevator, rotary table (configured to adjust direction for the vehicle's entry and exit), horizontal carrier (transporting the vehicle inside the garage), vehicle platform (storage and retrieval device), parking device (comb frame) and control center.
This type of system is mainly used for the half under-ground, where there is some space with centain height above the ground and the middle layer can be used for other propose.
Parktec can design non-standard according to the requirement of different clients.
Working principle
Elevator stands in the middle of laneway; the parking direction of vehicles parallels to the laneway. When storing, elevator takes the car to the shuttle of relevant layer, and the shuttle carries the car to the empty berth. Retrieving process is reverse.
Technical specification
| Vehicle dimension (mm) | 5300×1900×1550/2050 |
| Weight | 2350kg |
| Elevating speed (m/min) | 60 |
| Travelling speed (m/min) | 60-120 |
| Access speed (s) | 25-45 |
| Elevating motor (KW) | 15 |
| Travelling motor (KW) | 2.2 |
| Sliding motor (KW) | 1.1 |
| Drive mode | Motor + Chain |
| Control mode | PLC |
| Operation mode | Touch screen or IC card |
| Power unit | AC 50Hz 3-phase 380V double power supply |
