Model NO.
HB-WRS-002
LED
6PCS/12PCS
LED Color
Yellow/White(Customied)
Load Bearing
10 Ton
Waterproof
IP68
Light
Flash Light/Steady Light
Transport Package
Inner Box and Carton
Specification
SGS
Trademark
HB
Origin
China
Production Capacity
2000PCS/Week
Type:
Aluminum Alloy Road Stud
Application:
Railways
Reflectors:
LED
Number of Reflective Surfaces:
Single&Double-Side
Certification:
CE
Size:
100*108*20mm
Product Description
We also have many kinds of plastic road stud and other aluminium road stud,solor road stud,glass road stud and ceramic road stud.Road lighting is a crucial part of road design, and designers need to ensure the roadway is adequately lit to provide illumination of the road ahead and increased reaction time . Solar road studs offer numerous benefi ts, as mentioned in this article. Solar road studs should be of a high quality, have a high compression resistance and wide temperature range, and should be correctly suited to their application, be it on the road edge, curves, intersections, pedestrian crossings . The road sector should aspire to apply automatic integration of safety measures, as is standard in aircraft safety. Hence, road studs should be incorporated into designs as an additional safety measure. Installing and upgrading roads with the use of LED lighting and solar road studs or hardwired studs will make a vital contribution to the reduction in road accidents and the unacceptable burden they impose on society.
We can customize the products to your needs.And any color is available.
Specification
Features:
1.Visual Distance :>1000meters
2.Work Temperature:-20ºC~+80ºC
3.Material:Anti-UV PC+Aluminum
4.Product Size:100*108*20MM,N.W:320g
5.Protect Level:IP68;
6.Weight Resistance in static:>10 Tons
7.Wire color: brown to positive pole, blue to negative pole 2*0.5 square 0.6 meters cable
Installation of Wired Road Stud
1. When install the road studs,it need Set security facilities and configuring security personnel to
ensure the safety of the installation work carried out.
2. Need check the location of the installation required a flat, specifications.
3. Try to choose sunny weather construction to make sure the floor is clean, dry (with fixed spike
glue must be clean, dry ground).
4. When the glue is installed: appropriate amount of glue needed to ensure that the bottom was
saturated sticky glue, such as glue, there is the need to clean up the spill,
Press the spike at the installation location, ensure correct orientation.
5. Cast aluminum with foot installation: holes deeper than "nail pin" depth 1cm, hole diameter is
larger than the "nail pin" diameter 2mm (control between 2-5mm).
6. After installation is complete, once inspections to ensure proper installation position of the
spike, there is no anti-loaded, installed crooked.
7. After curing spike more than 4 hours, evacuate install security isolation facilities.
| Product Name | Tunnel Wired Road Stud |
| Lighting time | Fully charged |
| LED color | Yellow(can customize) |
| LED Qty | 6PCS,12Pcs Diameter 5mm High Brightness Epistar LED |
| Working voltage | DC12V.DC24V OR AC220V |
| Main Device | ASA shell,anti-UV,anti-yellowing |
| Warranty | 7-10years |
| Visual Distance | >1000meters |
| Size | 100*108*20mm |
| Weight | 320g/pc |
1.Visual Distance :>1000meters
2.Work Temperature:-20ºC~+80ºC
3.Material:Anti-UV PC+Aluminum
4.Product Size:100*108*20MM,N.W:320g
5.Protect Level:IP68;
6.Weight Resistance in static:>10 Tons
7.Wire color: brown to positive pole, blue to negative pole 2*0.5 square 0.6 meters cable
Installation of Wired Road Stud
1. When install the road studs,it need Set security facilities and configuring security personnel to
ensure the safety of the installation work carried out.
2. Need check the location of the installation required a flat, specifications.
3. Try to choose sunny weather construction to make sure the floor is clean, dry (with fixed spike
glue must be clean, dry ground).
4. When the glue is installed: appropriate amount of glue needed to ensure that the bottom was
saturated sticky glue, such as glue, there is the need to clean up the spill,
Press the spike at the installation location, ensure correct orientation.
5. Cast aluminum with foot installation: holes deeper than "nail pin" depth 1cm, hole diameter is
larger than the "nail pin" diameter 2mm (control between 2-5mm).
6. After installation is complete, once inspections to ensure proper installation position of the
spike, there is no anti-loaded, installed crooked.
7. After curing spike more than 4 hours, evacuate install security isolation facilities.
Company
We promise we will offer high quality and favorable price. We're pleased to get your Inquiry and we will reply all the emails as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers".
We welcome our customers to establish long time business relationships with us.
Apparel & Accessories , Auto Parts & Accessories , Construction & Decoration , Industrial Equipment & Components , Light Industry & Daily Use , Manufacturing & Processing Machinery , Security & Protection , Service , Tools & Hardware , Transportation
If have any problem,contact me freely
Send Message
