Standard design, clear vision, although the space is compact, the operator has convenient access;
Low center of gravity, good stability, small turning radius, flexible steering;
The half-seat chair design reduces the operator's fatigue to the greatest extent;
Adopting the international advanced AC electric control, so that the forklift's walking, lifting and steering are all controlled by computer;
Using separate excitation and control technology, with regenerative braking and "slope suppression" characteristics;
Advanced MOSFET control system makes forklift operation more precise and stable operation;
The highest limit has mechanical and electronic dual protection functions;
The full hydraulic power steering system makes the operator lighter and safer.
| 1.2 | model | CPD10A | ||||
| 1.3 | Drive mode: electric (battery), diesel, gasoline, gas | electric | ||||
| 1.4 | Driving mode (manual, walking, standing driving, sitting driving, picking) | Stand by | ||||
| 1.5 | Rated load | Q(kg) | 1000 | |||
| 1.6 | Load center distance | c(mm) | 600 | |||
| 1.8 | Front overhang | x(mm) | 140 | |||
| 1.9 | Wheelbase | Y(mm) | 975 | |||
| weight | 2.1 | Self-respect | kg | 2050 | ||
| 2.2 | Axle load, front/rear axle when fully loaded | kg | 2580/500 | |||
| 2.3 | Axle load, front/rear axle at no load | kg | 800/1250 | |||
| Wheel chassis | 3.1 | Wheels (rubber wheels, high elastomers, pneumatic wheels, polyurethane wheels) | Polyurethane wheel | |||
| 3.2 | Wheel size, front wheel | Φ250x80 | ||||
| 3.3 | Wheel size, rear wheel | Φ280x100 | ||||
| 3.5 | Wheels, number of front and rear (x = driving wheels) | 2/1x | ||||
| 3.6 | Front wheel track | b10(mm) | 770 | |||
| 3.7 | Rear wheel track | b11(mm) | 0 | |||
| size | 4.1 | Mast/Fork-Front/Rear Angle | City | 0 | ||
| 4.2 | Height when the mast is retracted | h1(mm) | 2155 | |||
| 4.3 | Free lifting height | h2(mm) | 1600 | |||
| 4.4 | Lifting height | h3(mm) | 3000 | |||
| 4.5 | Maximum height of mast during operation | h4(mm) | 3565 | |||
| 4.7 | Height of overhead guard (cab) | h6(mm) | 2090 | |||
| 4.8 | Seat height/standing height | h7(mm) | 75 | |||
| 4.9 | The minimum/maximum height of the operating handle in the driving position | h14(mm) | 1000 | |||
| 4.12 | Connector height | h10(mm) | ||||
| 4.19 | Overall length | l1(mm) | 2210 | |||
| 4.2 | Fork length | l2(mm) | 950 | |||
| 4.21 | Body width | b1(mm) | 850 | |||
| 4.22 | Fork size | slell(mm) | 36x100x950 | |||
| 4.23 | Forks DIN 15 173, grade/type A, B | II/A | ||||
| 4.24 | Fork frame width | b3(mm) | 560 | |||
| 4.31 | Ground clearance at the bottom of the mast | m1(mm) | 60 | |||
| 4.32 | Ground clearance of wheelbase center | m2(mm) | 50 | |||
| 4.33 | Aisle width, pallet 1000x1200 (1200 placed across forks) | Ast(mm) | 2600 | |||
| 4.34 | Aisle width, pallet 800x1200 (1200 placed along the fork) | Ast(mm) | 2750 | |||
| 4.35 | Turning radius | Wa (mm) | 1140 | |||
| 4.36 | Internal turning radius | b13(mm) | 1140 | |||
| Performance data | 5.1 | Driving speed, fully loaded/unloaded | Km/h | 5.8/6.0 | ||
| 5.2 | Lifting speed, fully loaded/unloaded | m/s | 0.11/0.15 | |||
| 5.3 | Lowering speed, fully loaded/unloaded | m/s | 0.15/0.11 | |||
| 5.5 | Traction, loading/unloading | N | ||||
| 5.6 | Maximum traction, loading/unloading | N | 2000/2050 | |||
| 5.7 | Gradeability, loading/unloading | % | ||||
| 5.8 | Maximum climbing capacity, fully loaded/unloaded | % | ||||
| 5.9 | Acceleration time, loading/unloading | s | 6.5/5.5 | |||
| 5.1 | Service brake | Regenerative braking | ||||
| Electric motor | 6.1 | Drive motor power | kW | 2.2 | ||
| 6.2 | Increase motor power | kW | 3 | |||
| 6.3 | Battery standard, no | FROM | ||||
| 6.4 | Battery voltage/rated capacity | V / Ah | 24/360 | |||
| 6.5 | Battery weight | Kg | 355 | |||
| Battery size (length X width X height) | mm | 610x278x690 | ||||
| Additional data | 8.1 | Drive control mode | DC/AC | |||
| 8.2 | Work pressure | bar | 120 | |||
| 8.3 | flow | l / min | 6 | |||
| 8.4 | The noise level at the driver's ear complies with DIN12053 | dB(A) | 68 | |||
| 8.5 | Traction connector, type DIN | Q(t) | ||||
We supervise the process from the factory to the port designated by the customer to ensure that the customer's products arrive at the destination accurately and safely.
Our factories have passed the certification of relevant organizations.
For example, ISO, CNAS, IAF and so on.
Products have also passed CE, GHOST certification and so on.
Every year, we regularly attend the Canton Fair, the Philippines, Indonesia, Russia and other construction machinery and building machinery exhibitions.
We have received more than 1000 clients and training engineers from more than 100 countries around the world.
Send Message or Chat Now for Best price!!!
CANMAX, as a professional one-stop machinery equipment supplier, we always keep the service philosophy " Running On Faith, Keep Promise, Focus On Customer Concerns, Walk To Success With Customer ", devote ourselves to what customer needs, and provide products and service with high performance and good price.
Please let us know the main use, brand, power and other requirements of the purchased products.
We will recommend the related products to you.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
