1. Original imported CURTIS controller, high-power MOSFETS drive, high frequency, high efficiency, quiet, with stepless speed regulation and reverse brake function.
2. Excellent performance of the drive system, sensitive response, good dynamic characteristics, strong overload capacity, smooth power output, effectively prolonging the service life of the battery.
3. High-quality hydraulic power unit, compact structure, small size, light weight, high efficiency, no leakage, reliable performance, beautiful appearance, stable and reliable lifting and lowering, and the lifting speed can be adjusted according to user needs.
4. The high-quality intelligent charger adopts the international advanced high-frequency switching power supply circuit, and the embedded CPU precisely controls the entire charging process. It is small in size, light in weight and high in efficiency!
5. High-performance battery, excellent cycle performance and deep discharge recovery ability, super battery life, super long service life.
6. Using the best quality C-shaped steel material, the wall thickness is enlarged, the section performance is excellent, the strength is high, the vehicle weight is moderate, and it has excellent stability and strength.
Excellent safety performance
1. CURTIS controller MOSFETS has a short-circuit protection function to prevent runaway.
2. The door frame is equipped with high-strength acrylic protective board, which has good transparency, strong impact resistance and excellent protection effect.
3. The protective arm installation holes are reserved on both sides of the driving position, and the protective arm can be selected to protect the safety of the operator.
4. An emergency reverse switch is installed on the control handle. When the vehicle is out of control, the operator's belly will actively or passively touch the reverse switch, and the vehicle will stop immediately and move quickly in reverse for a short distance to prevent the operator's body from being squeezed. Pressure injury.
![](https://image.cautop.com/365f3j00isNIrpuPbKUM/Lonking-600-1000kg-LG10-15ED-Stacker-Forklift.jpg)
model | LG10ED | LG10ED | LG10ED | LG10ED | LG15ED | LG15ED | LG15ED | LG15ED |
1.6M | 2.6M | 3.2M | 3.6M | 1.6M | 2.6M | 3.2M | 3.6M | |
Maximum load | 1000 | 1500 | ||||||
Kg | ||||||||
Maximum point load | 1000 | 800 | 700 | 600 | 1500 | 1200 | 1100 | 900 |
Kg | ||||||||
Maximum lifting height | 1600 | 2600 | 3200 | 3600 | 1600 | 2600 | 3200 | 3600 |
mm | ||||||||
Load center mm | 600 | |||||||
Fork length mm | 1150 | |||||||
Width of single fork | 180 | |||||||
mm | ||||||||
Outer width of two forks | 570/695 | |||||||
mm | ||||||||
Minimum fork height | 86 | |||||||
Degree mm | ||||||||
Fixed leg length mm | 875 | |||||||
Single fixed leg width | 124 | |||||||
(Including front double wheel frame) mm | ||||||||
Two fixed legs | 266/391 | |||||||
Inner width mm | ||||||||
Two fixed legs | 514/639 | |||||||
Outer width mm | ||||||||
Channel width: 1000×1200 pallets | 2232 | |||||||
(1200 across forks) mm | ||||||||
Channel width: 800×1200 pallets | 2302 | |||||||
(1200 placed along the fork) mm | ||||||||
Turning radius mm | 1460 | |||||||
Front wheel size and number | φ80×70, 4 | |||||||
Drive wheel size and number | φ250×80, 1 piece | |||||||
Balance wheel size and number | φ150×58, 2 | |||||||
Total length | 1914(2314) | |||||||
(Pedal down) mm | ||||||||
Overall width mm | 808 | |||||||
At the highest point | 2077 | 3137 | 3687 | 4087 | 2077 | 3137 | 3687 | 4087 |
Total body height mm | ||||||||
At the lowest point | 2077 | 1877 | 2127 | 2327 | 2077 | 1877 | 2127 | 2327 |
Total body height mm | ||||||||
Accumulator | 24V/210AH(790/210/458) | |||||||
(Length/width/height) mm | ||||||||
charger | 24V/30A | |||||||
Lifting pump station | Power 2.2kw. Lifting speed: no load/full load: 130/82mm/s, descent speed: no load/full load: 141/133mm/s | |||||||
motor | Power 1.2kw. Walking speed: no load/full load: 4.8/4.0km/h | |||||||
After the battery is fully charged | 5 | |||||||
Working hours h | ||||||||
Self weight Kg | 817 | 887 | 917 | 927 | 827 | 897 | 927 | 937 |
We supervise the process from the factory to the port designated by the customer to ensure that the customer's products arrive at the destination accurately and safely.
Our factories have passed the certification of relevant organizations.
For example, ISO, CNAS, IAF and so on.
Products have also passed CE, GHOST certification and so on.
Every year, we regularly attend the Canton Fair, the Philippines, Indonesia, Russia and other construction machinery and building machinery exhibitions.
We have received more than 1000 clients and training engineers from more than 100 countries around the world.
Send Message or Chat Now for Best price!!!
CANMAX, as a professional one-stop machinery equipment supplier, we always keep the service philosophy " Running On Faith, Keep Promise, Focus On Customer Concerns, Walk To Success With Customer ", devote ourselves to what customer needs, and provide products and service with high performance and good price.
Please let us know the main use, brand, power and other requirements of the purchased products.
We will recommend the related products to you.
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓