ZC0007
CE
SWR
China
9023009000
Product Description
ZC0007 Milli Current Sensor is used to measure weak electric current signal in a circuit.
Specification
| Range | -20mA~20mA |
| Resolution | 0.01mA |
| Accuracy | ±1%F.S |
| Internal resistance | 200mΩ |
Usage
1.Connect the Micro Current Sensor to computer by USB cable.
2.Open the SWR iLab V8.0 software.
3. Click 'New' to create new experimental template.
Notes
The Milli Current Sensor needs calibration before use, and should be connected in series in the circuit.
When measuring, make sure the current to be measured does not exceed the measuring range of the sensor.
Ground the negative pole of sensor during measuring in order to achieve higher accuracy if it is possible.
After the experiment, preserve the sensor in a dry place.
Typical experiment
The charging and discharging of capacitor
VA characteristics of small bulb, diode and conductor
Glass conduct
