General Introduction:
80HP 4WD tractor
59KW diesel engine
8+2 gear shift
Hydraulic steering
Dual stage clutch
Various implements available
Technical Specification:
Tractor Parameters | Model | JM-804 | |
Drive Type | 4WD | ||
Overall Dimensions L×W×H(mm): | 4060×1929×2568 | ||
Wheel Track (mm) | Front | 1450 | |
Rear | 1370~1790 | ||
Wheel Base(mm) | 2236 | ||
Ground Clearance (mm) | 340 | ||
Rated Traction Force(N) | 16700 | ||
Construction Mass(kg) | 3215 | ||
Min.Turning Radius(m) | 4.3 | ||
Theoretical Speed (Without creeper gear(km/h) | Forward | 3.22,4.31,6.83,9.19,11.57,15.50,24.60,33.09 | |
Reverse | 3.64,13.12 | ||
Engine Specifications
| Model | LR4B5-T79Q-U2 | |
Type | 4-cylinder 4-stroke cycle water cooled | ||
Rated Power(kw/hp) | 59(80) | ||
Rated Speed (rpm) | 2300 | ||
Bore×Stroke(mm) | 108×135 | ||
Total Displacement(L) | 4.94 | ||
Drive System | Clutch | Dry dual stage | |
Gear Box | (4+1)×2 Sleeve gear shift IZ type Epicyclic declaration constitute | ||
Main Drive | One pair of spiral bevel gearing | ||
Differential | Bevel gear | ||
Differential Lock | Sliding pin, foot operated | ||
Final Transmission | Planetary reduction gear | ||
Travelling Mechanism | Tyre | Front | 9.5-24 |
Rear | 16.9-30 | ||
Steering Gear | Hydraulic steering | ||
Brake | Dry disc type | ||
Working Device | Hydraulic System | Lifting Capacity at 610mm Behind Lift Point (KG) | 1500 |
3-Point Suspension | Category:II | ||
P.T.O Shaft | Rotating Speed (rpm) | 540/1000 | |
Spline Size | 6-∮35 Rectangular Spline | ||
Fusenmach provides different size tractors from 12 HP to 220 HP.
Some hot-sell models are approved by OECD and E-MARK Certificate.
The tractors are widely used in wet & dry farm land, garden, transportation in plain or hilly areas.
We also provide tractor implements like front end loader, backhoe, trailer, mower, wood chipper, hole digger, subsoiler, rotavator, tiller, cultivator, plough, harrow, sprayer, hay baler, etc.
