Manual Powder Coating Gun
Hongyuan JOBON brand S20 Manual Powder Coating Gun is the best Touch Screen Control Gun and it can deal with most complicated parts with great efficiency.
Product and Feature
Manual Powder Coating Gun
Model No.: S20 (New Product Year 2021)
Type: Coating Spray Gun
Place of Origin: Qingdao, China
JOBON brand S20 Manual Powder Coating Gun is the best Touch Screen Control Gun and it can deal with most complicated parts with great efficiency.
Advantage and feature:
(1) AC100~240V, 50/60Hz (automatic adaption)
(2) 5patents included for S20 powder coating gun
(3) Convenient and quick touch screen operation
(4) Overcome Faraday effect
(5) S20 manual powder coating gun has good spray performance, and it can reach thickness more than 100um even to 200um, without orange peel issues
(6) It can quickly return to factory setting, for fear of any mis-operation problems
(7) The S20 manual powder coating gun has automatic caldding effect, and can reduce manual repair greatly
(8) The S20 manual powder coating gun has the most advanced design and control system of electrostatic output---can automatically change powder output to meet the requirement of different products.
(9) The coating gun can cooperate with robot to realize "Automatic & Continuous Parameter adjusting" to exceed human operation
1.Strong capability for deep groove & angle workpiece
2.Powerful automatic thickness control function
3.Large coating area per unit time
4.Two years warranty
5.Easy to operate
6.3 languages control panel (Chinese, English, Spanish)
7.Quick Color Change
Voltage | 100~240VAC |
Frequency | 50~60Hz |
Max Power | 100W |
Safety Level | IP54 |
Ambient Temperature | 0-40ºC |
Input Pressure | 0.55MPa (5.5bar, 80PSI) |
Max Moisture Content of Compressed Air | 1.3g/cubic meters |
Max Oil Content of Compressed Air | 0.1mg/cubic meters |
Electrostatic Polarity | Negative |
Max Output Voltage | 150KV |
Max Output Current | 120Ua |
Gun Weight | 580g |
Gun Length | 330mm |
Cable Length | 4m |
Powder Duct | 3.5m |
Max Powder Output | 650g/min |
Packing Size | 72cm*52.5cm*90cm |
Packing Weight | 42kg |
Some Superior Capabilities of JOBON S20 Manual Powder Coating Gun:
- Automatic thickness control
- Narrow deep groove coating
- Automatic cladding coating
- Far distance penetrate adhesion coating
- Included angle coating
S20 Manual Powder Coating Gun service life can be more than 10years, with low maintenance fee and low service parts cost. This benefits from high quality of gun itself and the most advanced design of electrostatic output to reduce parts wear during use.
***Safety Rules for Electrostatic Powder Coating Machine
(1) The instructions for use must be read carefully.
(2) During spray, the workers should not wear gloves.
(3) Smoking and fire are not allowed at work site.
***Application
S20 manual powder coating gun gets good coating finish of metal rollers, metal doors, decoration fences, stairs, fire extinguisher parts, fitness equipment, air compressor, gas tank etc.
***Warranty/After Sales Service
(1) Two-year warranty for cascade and circuit board
(2) Maintenance parts available all the time: gun parts, powder pump, venture tube, spray nozzles, etc.
(3) 24hours on line sales service available
***About Our factory
(1) ISO9001
(2) High-Tech factory
(3) Start from 1999 to manufacture and supply powder coating machinery
Related products 
